Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Three NASCAR drivers traded race-bred machinery for a one-person Peel P50 in a Donut Media obstacle course, and the result was less a conventional race than a slow-speed lesson in momentum, traction and three-wheel instability. Riley Herbst, Connor Zilisch and Jesse Love had to push the car backward from a stop, turn inside a marked box, circle barrels and avoid cones. The Peel weighs about 230 pounds and reaches only about 30–35 mph, but its inability to reverse, exposed mechanical problems and habit of lifting onto two wheels made the challenge unexpectedly difficult.
What did the NASCAR drivers do in the Peel P50?
The feature was an obstacle-course challenge produced by Donut Media in partnership with NASCAR, not a points-paying NASCAR event or a head-to-head race on a racing circuit. Each driver received a familiarization run, followed by timed attempts. The fastest total time would win, although the published report does not identify the winner and directs viewers to the embedded video for the final result.
As an Amazon Associate I earn from qualifying purchases.
Free tools Windows power users keep installed
One-click scans. No signup required.
The course was designed to make the P50’s unusual controls part of the contest. Drivers started by pushing the car backward because the vehicle cannot reverse under its own power. They then had to complete a tight circle inside a marked box, round two barrels and weave around cones. Every cone hit added a time penalty, so precision mattered more than the drivers’ normal ability to carry speed.
The three drivers
- Riley Herbst: A 23XI Racing driver in the NASCAR Cup Series.
- Connor Zilisch: A Trackhouse Racing young star.
- Jesse Love: The 2025 Xfinity Series champion and a Richard Childress Racing driver in the renamed O’Reilly Auto Parts Series.
Why was the Peel P50 so hard to control?
The P50’s small size does not make it automatically easy to drive. It is a three-wheeled, one-person vehicle weighing approximately 230 pounds, with a reported top speed of about 30–35 mph. That low mass means small shifts in body weight, steering input or throttle can have an immediate effect, while the single rear wheel and narrow footprint provide less lateral stability than a conventional four-wheeled car.
Popular on Amazon
- Doors Open
- Pullback Action
- Die Cast Metal Body
- PULL BACK ACTION WITH FREE ROLLING WHEELS
The course also exposed the limitations of a vehicle conceived as a tiny urban runabout rather than a competition machine. There was no powered reverse maneuver, so the drivers had to physically push it backward. Tight turns loaded the outside edge of the chassis, and the P50 repeatedly rocked onto two wheels before dropping back onto all three. Cones were struck, and parts of the painted course were damaged as the attempts unfolded.
What went wrong during the runs?
Love’s practice rollover
Jesse Love flipped the three-wheeler during his practice run. The car’s very low weight made it easy to right, but the incident demonstrated how quickly a three-wheeled layout can tip when a tight maneuver combines steering and lateral weight transfer. Love also found that Herbst had left the handbrake engaged, which explained why Herbst struggled to push the P50 backward.
Zilisch’s chain and door problems
Connor Zilisch suffered the most obvious mechanical setbacks. The rear-wheel-drive chain came off during his first timed attempt, sending that run beyond five minutes. On his second attempt, the door would not stay shut. Those failures turned what should have been a short precision course into a test of whether the car could complete a run at all.
Instability became the spectacle
As the drivers tried to keep the P50 inside the marked areas, it repeatedly balanced on two wheels and settled back onto three. The combination of penalties, awkward pushing and mechanical trouble produced the comic contrast the segment was built around. Donut Media host Steph Gutierrez summed up the appeal: “There’s something entertaining about watching grown men in a tiny car.”
How does the Peel P50 compare with a NASCAR car?
The vehicles serve completely different purposes, so the comparison is about scale and control rather than performance. A Cup car is engineered for sustained high-speed oval racing, while the P50 was built as a minimalist single-seat runabout. The reported P50 figures—about 230 pounds and 30–35 mph—put its mass and speed in a different category from the race cars these drivers normally operate.
Also popular on Amazon
- Highly detailed 1:24 scale diecast model kit of 1929 Ford Model A
- Comes with everything needed for assembly including screwdriver
- Features opening parts, rolling wheels and pre-painted metal body
- Easy to assemble, creates fully functional rolling replica model car
- Fun and educational STEM activity for kids to build realistic miniature vehicle
| Feature | Peel P50 in the challenge | NASCAR race car context |
|---|---|---|
| Occupants | One person | One driver |
| Wheel layout | Three wheels | Four wheels |
| Reported weight | About 230 pounds | Not stated in the report |
| Reported top speed | About 30–35 mph | Not stated in the report |
| Reverse capability | Cannot reverse under its own power; drivers pushed it backward | Not part of this challenge |
| Primary use | Compact urban transport | Closed-course stock-car competition |
When was the Peel P50 originally made?
The report says the P50 was originally produced for four model years in the 1960s and was later resurrected for production. Its pop-culture profile grew after Jeremy Clarkson drove one through BBC offices on Top Gear, an appearance that introduced the tiny vehicle to a much wider audience. The NASCAR challenge used that familiar oddity to create a very different kind of driving spectacle.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What should viewers take away from the video?
- This was a NASCAR-and-Donut-Media entertainment feature, not a standard NASCAR race.
- Herbst, Zilisch and Love were the participating drivers.
- The P50’s approximately 230-pound weight and 30–35 mph top speed did not prevent difficult handling.
- No reverse gear, cone penalties and a tight turning box dictated the strategy.
- A rollover, a stuck handbrake, a dropped drive chain and a door that would not stay shut shaped the timed attempts.
- The report does not name the winning driver; the embedded video contains the finish.
Frequently Asked Questions
Can I buy a Peel P50 model car?
Collectible and die-cast versions sometimes appear through specialist retailers and major marketplaces, but availability and licensing change. Verify the seller, scale, manufacturer and whether the listing is an officially licensed model before purchasing.
Is the Peel P50 street legal?
Legality depends on the country, state or territory, including rules for three-wheeled vehicles, registration, lighting and minimum equipment. Check your local motor-vehicle authority rather than assuming that a road-legal version in one jurisdiction qualifies elsewhere.
Why does a three-wheeled vehicle tip more easily than a four-wheeled car?
A three-wheel layout provides fewer contact points and a narrower stability base. During a sharp turn, braking or uneven-surface maneuver, the vehicle’s center of gravity can move outside that base, lifting one side before the suspension or steering can recover.
Who made the NASCAR Peel P50 challenge video?
Donut Media produced the obstacle-course feature in partnership with NASCAR. The segment uses the drivers’ familiarization and timed runs as the narrative structure rather than presenting an official series result.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitches




