DriversRecommendedOutdated drivers can make a good PC feel brokenScan driver issues before chasing fixes manually.Scan NowBlack Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsSlow PC?RecommendedPC slow today? Run a repair scan before it gets worseResolve common Windows issues and optimize system performance.Scan Now×
Get listed

11 MIN

The 1963 Impala SportsRoof Chevrolet Never Built—And Why It Works

The 1963 Impala SportsRoof began as Steve Stanford’s illustration and became a one-off custom built by Barry Penfound with a 1960 Plymouth Fury roof and rear-window section.

By CarCody Team

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

The 1963 Chevrolet Impala SportsRoof was never a factory Chevrolet model; it began as Steve Stanford’s 1996 design illustration and became a one-off custom built by Barry Penfound for dealer and enthusiast Jack Matia. The concept replaced the Impala’s formal roof with a smoother, fastback-like profile using the roof skin and rear-window section of a 1960 Plymouth Fury. It matters because the finished car shows, in full size, how far a roof change can transform an instantly recognizable American body without erasing its identity.

Hot Rod’s feature on the project is the primary record of its construction. It does not describe a Chevrolet engineering program, a factory prototype, production plans, performance testing, current ownership, or a present-day valuation. What it does document is a disciplined custom-car exercise: compare two bodies, measure the critical interfaces, and then turn an imagined alternate Impala into metal.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What exactly was the 1963 Impala SportsRoof?

It was a hypothetical alternate body style for the 1963 Chevrolet Impala, not a model Chevrolet sold. Artist Steve Stanford drew the proposal for the July 1996 issue of Custom Rodder, imagining an Impala with a more curving roofline in place of the stock car’s formal, boxy upper structure. Years later, custom builder Barry Penfound used that drawing as the basis for a real car.

The distinction is essential. The illustration was an independent design idea, and Penfound’s completed vehicle was a custom project commissioned by Jack Matia. Nothing in the documented feature indicates that Chevrolet or General Motors sponsored, engineered, or evaluated the SportsRoof. Calling it a “prototype” is therefore descriptive of the concept’s role in the story, not evidence of a factory-built test car. Hot Rod’s account of the build is the best source for that history.

Why does the roof change make such a difference?

The roof is the largest uninterrupted surface on a classic car, so changing its arc alters the silhouette before a viewer notices any trim or mechanical detail. A stock 1963 Impala presents a relatively upright, formal greenhouse. Stanford’s drawing lowers the visual mass and carries the roof toward the rear in a softer curve, giving the car the visual movement associated with a sports coupe while retaining the long Impala body.

Popular on Amazon
Sale
LISEN Retractable Car Charger, 84W Car Charger USB C Fast Charge, 4 in 1 | Cigarette Lighter Adapter, Car Accessories, for Christmas Day Gifts for Men Women Dad Mom, for iPhone 18 Pro Max Duo 17 16-11
  • Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
  • Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
  • Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
  • Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
  • Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.

Four design questions explain why the concept is more than a cosmetic chop:

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  • Roof profile: The proposed curve changes the car’s side view and the apparent height of the passenger compartment.
  • Roof-to-windshield transition: The front edge has to meet the Impala windshield opening without looking pinched, abrupt, or grafted on.
  • Rear window and deck: The glass opening must flow into the trunk deck and quarter panels, or the new roof will look like a separate shell.
  • Identity: The hood, fenders, beltline, grille, and overall proportions must still read as a 1963 Impala.

These are visual and construction criteria, not instrumented measurements. The feature provides the build story and the builder’s observations, but it does not report wind-tunnel data, rigidity testing, drag figures, or passenger-space measurements.

How did the custom car turn the drawing into metal?

Penfound had already built a 1959 Buick and a 1964 Cadillac in a contemporary custom style. When Matia asked him to create a Chevrolet in that spirit, Penfound returned to Stanford’s Impala illustration rather than designing an unrelated roof from scratch.

The crucial donor was a 1960 Plymouth Fury. Penfound used the Fury’s roof skin and rear-window section to create the SportsRoof treatment. Before cutting, he took dozens of measurements from both a 1963 Impala and a 1960 Plymouth. That preparation was intended to establish whether the donor section could meet the Chevrolet’s windshield, quarter structure, and rear deck with a coherent line.

“They seemed a good match, especially where the roof met the Impala windshield and the [rear] window met the deck.” — Barry Penfound, as quoted by Hot Rod

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

The quotation explains the project’s central gamble. A donor roof is useful only if its front and rear interfaces can be made to look intentional. The windshield junction controls the beginning of the curve; the rear-window-to-deck junction controls whether the roof appears to belong to the car. Penfound’s measurements suggested that those areas were workable, allowing the custom to follow Stanford’s idea instead of becoming an improvised patchwork.

Also popular on Amazon
Sale
Kaistyle for Magsafe Car Mount【Strong Magnet】 Magnetic Phone Holder for Car Phone Holder Mount Dash Mounted Holders Phone Holders for Your Car Accessories for Women Men for iPhone 18 Pro Max 17 16 15
  • ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
  • ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
  • ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
  • ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
  • ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient

That does not make the conversion a bolt-on operation. The documented car required custom body work, structural decisions, finishing, and alignment beyond simply exchanging a roof panel. A Plymouth donor section can provide the shape, but the surrounding Chevrolet metal still has to be cut, joined, fitted, smoothed, and finished as one body.

How do the stock Impala, illustration, and finished custom compare?

The three stages answer different questions. The stock Impala shows Chevrolet’s production intent; Stanford’s drawing shows the proposed visual direction; Penfound’s car shows what survives when that direction is executed in full size.

Design axis Stock 1963 Impala Stanford’s SportsRoof illustration Penfound’s completed custom
Roofline and silhouette Formal, boxier roof profile associated with the production body. More curvaceous roof intended to lower and streamline the visual greenhouse. Realized curved roof using a 1960 Plymouth Fury roof and rear-window section.
Roof-to-windshield transition Factory relationship between the Impala roof and windshield opening. Illustrated as a smooth, integrated sweep. Measured and adapted so the donor roof could meet the Impala windshield area.
Rear window and deck Original Impala rear-window and trunk-deck treatment. Drawn as a continuous transition into the rear of the car. Built around the Fury rear-window section, with the window meeting the Impala deck as a key fit point.
Recognizable Impala identity Complete factory identity. Identity retained as a design goal, despite the altered roof. Impala body and major styling cues remain visible beneath the custom greenhouse.

The last row is the concept’s real test, in an editorial sense: the car changes one dominant architectural element while leaving enough of the original body to remain legible. Whether a reader prefers the stock roof or the SportsRoof is a styling judgment, not a measured result reported by the source.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Was the SportsRoof an official Chevrolet concept?

No. The available documentation supports three separate facts: Stanford drew the hypothetical design; Penfound built a custom interpretation; and Matia commissioned that custom. It does not support the claim that Chevrolet commissioned the drawing, constructed a factory prototype, or considered a production SportsRoof Impala.

That clarification also prevents confusion with other unusual 1963 Impalas. The Z11, for example, was a factory performance model discussed in separate coverage; it is not the SportsRoof custom and should not be used as evidence that Chevrolet built this roof style. The Z11 history concerns a different car and a different engineering purpose.

Why did the Plymouth Fury donor make sense?

Penfound’s choice was practical as well as aesthetic. The project needed a roof and rear-window shape that could support the illustrated curve while offering interfaces close enough to the Impala’s openings to be adapted. His measurements indicated a promising relationship at the windshield and deck, the two areas he specifically identified.

Also popular on Amazon
SINGARO Car Cup Holder Coaster, Silicone Cup Holder Insert, Universal Non-Slip Cup Holders, Car Accessories Interior for Women and Man Interior Sets 4 Pack Black
  • High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
  • Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
  • Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
  • Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
  • 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.

Using a donor section also gave the custom a coherent, stamped surface rather than asking a fabricator to invent every contour from flat sheet. That approach can preserve consistent curvature across the roof and window surround. It still demands careful cutting and joining, because the donor was designed for a different car, with different pillars, quarter panels, glass, seals, and internal structure.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

The result should therefore be understood as a bespoke body conversion. It is not a replacement-panel repair and not a catalog upgrade that an owner can install by following factory instructions. Anyone attempting a similar project would need body-measuring equipment, fabrication skill, a plan for structural reinforcement, glass and weather-seal fitment, and a way to verify that doors, quarters, and deck panels remain aligned after the roof is removed.

What would a builder need to consider before copying it?

The documented build does not provide a complete workshop manual, but its logic suggests a sensible decision sequence for a modern restomod or custom project:

  1. Freeze the design. Establish the target roof arc, window opening, beltline relationship, and deck transition with full-size templates or digital references.
  2. Measure both bodies. Record windshield width and angle, roof rails, pillar locations, rear-window opening, deck height, quarter-panel contours, and interior clearances. Penfound’s dozens of measurements were a prerequisite, not an optional refinement.
  3. Check glass and seals early. A roof that looks right in bare metal can fail when the windshield, rear glass, trim, and weatherstripping are considered.
  4. Plan structure. The roof and pillars contribute to the body shell. Cutting them requires an engineered bracing and reinforcement plan appropriate to the vehicle and local regulations.
  5. Mock up before final welding. Verify door gaps, quarter-panel flow, deck-lid operation, window placement, and sightlines while the donor section is still adjustable.
  6. Finish as one body. Metal finishing, filler control, primer, paint, trim, and interior work determine whether the conversion reads as an intentional design rather than a visible graft.

Those steps are general fabrication guidance inferred from the documented interfaces; they are not a claim that the Hot Rod feature specifies every procedure Penfound used.

Does the SportsRoof improve the Impala or just make it different?

It improves the Impala’s visual drama if the reader values a lower, more flowing silhouette over the original’s formal presence. The curved roof gives the long Chevrolet a stronger forward-to-rear sweep and makes the car look closer to a grand touring coupe. It also creates a clear visual story: the body remains recognizably Impala, but the greenhouse no longer follows the factory template.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

The trade-off is that a roof is not an isolated styling panel. A different arc can affect headroom, rear-seat access, glass availability, trunk-opening perception, interior trim, and the relationship between the roof and quarter panels. None of those practical outcomes is quantified in the source, so they should be treated as project considerations rather than documented shortcomings or benefits of this particular car.

Also popular on Amazon
4Pcs Car LED Lights Interior Wireless, 7 Colors Interior Car Lights with 6 Bright LED Lamp Beads, Portable USB Rechargeable Car Interior Led Night Light for Car Decor
  • 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
  • Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
  • Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
  • Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
  • Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.

Stylistically, the concept succeeds because the donor section was selected around the two transitions that viewers notice most. The roof does not merely descend toward the rear; it has to arrive at the deck in a way that looks designed. Penfound’s comment about the windshield and rear window explains why the finished interpretation can appear plausible even though its parts originated with two different manufacturers.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What does the source actually establish about the car today?

The feature establishes the original commission and construction story, but it does not establish the custom’s current owner, location, condition, display status, or value. No production total applies because this was not a Chevrolet model, and the available data does not provide a verified sale price or present-day appraisal.

That uncertainty is normal for a one-off custom documented years after its conception. A photograph or magazine feature can preserve the design and build history without providing a reliable chain of custody afterward. Claims that the car is still with Matia, resides in a particular collection, or has a specific market value would require separate, current documentation.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Why does this one-off matter to Impala history?

The SportsRoof illustrates how custom culture can test an alternate design path that a manufacturer never pursued. Chevrolet’s production Impala had a defined formal roof; Stanford’s drawing asked what would happen if the same body were given a more athletic greenhouse. Penfound’s build then supplied the missing physical evidence: not factory validation, but a full-size demonstration that the proportions could be made coherent.

It also shows the value of separating design authorship from construction authorship. Stanford imagined the form. Matia commissioned the project. Penfound solved the fabrication problem. Treating those roles accurately makes the story stronger than attributing the entire idea to Chevrolet or calling the custom an undiscovered factory prototype.

For readers interested in alternate Chevrolet body styles, the broader custom-car context is covered in Hot Rod’s overview of custom Chevy musclecars. The SportsRoof remains a particularly clear case because its defining change is easy to see and its donor strategy is documented.

Also popular on Amazon
Sale
Govee Car LED Lights, RGB Smart Car Interior Lights, App Control | DIY Mode and Music Mode, 2 Lines Design LED Lights for Cars with Car Charger, 12V
  • Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
  • Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
  • Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
  • 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
  • Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.

Could Chevrolet have built something like this?

In a purely design sense, yes: the custom demonstrates that a SportsRoof interpretation was plausible enough to be drawn, measured, and fabricated. But plausibility is not evidence of a cancelled Chevrolet program, and the finished custom does not reveal whether production tooling, crash requirements, glass supply, cost targets, or market research would have supported a factory version.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

That distinction is why the title’s “maybe it should have” is best read as an informed styling question rather than a historical claim. The car makes a persuasive case for the look. It cannot, by itself, prove that Chevrolet missed a viable production opportunity.

Bottom line: what should readers remember?

The 1963 Impala SportsRoof was a custom answer to a hypothetical question. Steve Stanford’s July 1996 illustration proposed the shape; Barry Penfound measured a 1963 Impala against a 1960 Plymouth Fury and used the Fury roof and rear-window section; Jack Matia commissioned the finished car. The result preserves the Impala’s recognizable body while replacing its formal greenhouse with a more curving, sports-coupe-like silhouette.

It is not a factory Chevrolet, not the Z11, and not evidence of an official GM prototype. Its significance is more focused and, in some ways, more interesting: it shows how a carefully chosen donor and precise attention to the windshield and deck transitions can turn an imagined alternate Impala into a convincing one-off.

Frequently Asked Questions

Did Chevrolet ever sell a 1963 Impala SportsRoof?

No. The SportsRoof name in this story refers to Stanford’s hypothetical design and Penfound’s later custom interpretation. Chevrolet production documentation is not presented as evidence for a SportsRoof model.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Is the Plymouth Fury roof a direct replacement for an Impala roof?

No. The Fury section was a donor component for extensive custom fabrication. Penfound measured both cars before proceeding, and the windshield, rear glass, pillars, structure, seals, and surrounding panels still required adaptation.

Is this car the same as a 1963 Impala Z11?

No. The Z11 was a separate factory performance model. The SportsRoof custom is defined by its altered roof and rear-window treatment, not by Z11 mechanical or competition specifications.

Can the custom’s current location or value be verified from the feature?

Not from the cited feature alone. It records the commission and construction but does not establish the car’s current owner, location, condition, or market valuation.

What makes the conversion look integrated instead of improvised?

The critical issue is how the new roof meets the Impala windshield and how the rear window flows into the deck. Penfound specifically described those interfaces as a good match after measuring the two cars, which is central to the finished appearance.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 12:25 pm GMT+0530.

Read next

Thanks for visiting Carcody

Carcody.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.co

Recommended PC Tool
Recommended PC Tool
Windows Errors? Fix Them Before They SpreadFree repair scan
Outdated Drivers Are Slowing You DownFree scan - exact matches

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.