Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Subaru is warning owners of certain 2026 Forester and Crosstrek SUVs not to drive them because a left-front suspension ball-joint fastener may be loose enough to separate without warning. The safety recall covers only eight vehicles in the United States—four Crosstreks and four Foresters—but a separation could cause sudden loss of steering control and raise the risk of a crash. Owners should park a potentially affected SUV outside, check its 17-digit VIN through Subaru’s recall lookup, and arrange a tow to an authorized Subaru dealer rather than driving it there.
Which Subaru vehicles are covered by recall 26V685?
National Highway Traffic Safety Administration (NHTSA) recall 26V685, listed under Subaru campaign WRI26, applies to eight U.S. vehicles built during narrow production windows in August 2026.
As an Amazon Associate I earn from qualifying purchases.
Recommended Free Tools
| Model | Model year | Vehicles covered | Build dates |
|---|---|---|---|
| Crosstrek | 2026 | Four | August 4–6, 2026 |
| Forester | 2026 | Four | August 5–13, 2026 |
This is not a warning for every Forester or Crosstrek. A VIN lookup is the only reliable way to determine whether an individual SUV is included.
Why is Subaru telling owners not to drive?
The potentially defective component is the left-hand front lower-control-arm ball-joint castle nut. If that nut was not tightened to specification, the ball joint can separate from the lower control arm. That failure can cause loss of control while the vehicle is moving, and Subaru’s filing says there may be no preceding warning.
Popular on Amazon
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
How the assembly problem occurred
Subaru reported that some left-hand front lower-control-arm assemblies may have been put into a finished-goods rack before their final torque was completed and then shipped to the vehicle assembly line. A field report of a separated ball joint arrived on September 15, 2026. Subaru began a 100% inspection of castle-nut fastening the next day, investigated through October 9, and decided on a voluntary recall October 10.
What should an owner do right now?
- Stop driving the SUV. Do not make a short trip to a dealer, even if the vehicle feels normal; the filing says separation may occur without a warning symptom.
- Park it outside. Subaru’s interim instruction is to keep a potentially affected vehicle outdoors rather than in a garage or other enclosed structure.
- Check the VIN. Use Subaru’s recall page and enter the vehicle’s 17-digit VIN. Subaru says the result is specific to that vehicle, not merely to its model or year.
- Call Subaru or an authorized dealer. Tell the service department that the vehicle may be covered by recall 26V685 and needs to be transported for inspection.
- Arrange a tow. Have the SUV taken to the dealer instead of driving it. Confirm when scheduling that the tow is for a safety recall and that the vehicle is not to be driven.
How will the dealer repair the recalled SUV?
The dealer will inspect the left-front lower-control-arm ball-joint assembly. If the assembly requires replacement, the dealer will replace it at no cost to the owner. The official remedy is an inspection and, when necessary, replacement performed through Subaru’s authorized service network; a home repair using generic suspension parts or tools is not an appropriate substitute.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Also popular on Amazon
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
What if the VIN lookup shows no recall?
A newly announced recall may not immediately display every affected VIN in public databases. NHTSA advises owners to check again if no result appears and to follow the manufacturer’s interim safety guidance. If your 2026 Forester or Crosstrek falls within the listed build period, contact Subaru or a dealer even while the online record is being updated, and do not drive until the vehicle’s status is confirmed.
When will owners receive official notices?
Subaru notified dealers on October 15, 2026. The filing planned phased remedy notifications beginning December 16, 2026, and states that owner notification would occur within 60 days if needed. Those mailing dates do not change the immediate no-drive instruction for a vehicle that may be affected.
Also popular on Amazon
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
What happens if the ball joint separates while driving?
Because the ball joint connects the suspension to the lower control arm, separation can compromise the wheel’s intended position and the driver’s ability to control the SUV. Subaru identifies loss of control as the resulting hazard and specifically states that there is no preceding warning. If a driver experiences a sudden change in steering or handling, they should slow as safely as possible, move away from traffic, call emergency services if needed, and have the vehicle towed rather than continuing to a destination.
Can owners repair or retorque the castle nut themselves?
No. The recall concerns a safety-critical suspension joint and a VIN-specific manufacturing condition. Subaru’s remedy requires dealer inspection and possible assembly replacement, so owners should not attempt to retorque the nut, install an aftermarket part, or rely on a general repair shop’s visual check as a replacement for the recall procedure.
Also popular on Amazon
- 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
- Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
- Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
- Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
- Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.
Frequently Asked Questions
Where can I find my Subaru’s 17-digit VIN?
The VIN is commonly shown on the driver-side dashboard visible through the windshield and on the vehicle title or registration. Enter the complete 17-character sequence exactly as shown; a partial VIN cannot establish recall coverage.
Does this recall apply to a 2025 Forester or Crosstrek?
The filing identifies only four 2026 Foresters and four 2026 Crosstreks built in August 2026. Earlier model years are not identified in this recall, but owners should use the VIN lookup for any separate open campaigns.
Also popular on Amazon
- Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
- Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
- Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
- 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
- Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.
Who pays for the recall inspection and repair?
The recall remedy is provided at no charge by an authorized Subaru dealer. Ask the dealer how towing will be coordinated before dispatching a tow truck, particularly if the SUV is already disabled.
Why might my vehicle not appear in NHTSA records yet?
Recall databases can lag behind a manufacturer’s initial filing while affected VINs are loaded and owner notices are prepared. Recheck the lookup and contact Subaru directly if your vehicle’s build timing suggests it may be involved.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →




