DriversRecommendedOutdated drivers can make a good PC feel brokenScan driver issues before chasing fixes manually.Scan NowBlack Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsWindows FixRecommendedWindows errors stealing your time? Find the fix fastScan stability, cleanup and performance issues.Fix Now×
Get listed

10 MIN

How Cosworth Created Aston Martin Valkyrie’s 6.5-Litre High-Revving V12

Cosworth’s bespoke 6.5-litre V12 gives the Aston Martin Valkyrie 1,000 bhp at 10,500 rpm. Here is how the engine was developed, lightened and adapted for endurance racing.

By CarCody Team

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

The Aston Martin Valkyrie’s Cosworth-built 6.5-litre naturally aspirated V12 is special because it combines unusually large displacement with a 11,100-rpm ceiling, 1,000 bhp, and a quoted 206 kg engine weight. It was a clean-sheet project developed specifically for the Valkyrie, not a lightly modified production motor. Aston Martin’s road car then adds a 160 bhp electric system for a published 1,160 bhp total. The title’s “largest modern NA V12” wording needs qualification: the official sources establish the 6.5-litre displacement and specifications, but do not provide a market-wide ranking proving it is definitively the largest modern naturally aspirated V12.

What exactly is the Aston Martin Valkyrie V12?

It is a Cosworth-designed and built, naturally aspirated 65-degree V12 with 6.5 litres of displacement. Aston Martin describes it as a bespoke, clean-sheet engine developed for the Valkyrie rather than an adaptation of an existing road-car unit. The company’s 2018 technical announcement gives the engine 1,000 bhp at 10,500 rpm, 740 Nm at 7,000 rpm, a maximum speed of 11,100 rpm and a mass of 206 kg. That works out to 153.8 bhp per litre, an extraordinary specific output for a road-car engine.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Those figures refer to the combustion engine alone. The road Valkyrie is a hybrid: Aston Martin says its electric system contributes 160 bhp and 280 Nm, producing published system totals of 1,160 bhp and 900 Nm. Keeping the engine and hybrid figures separate is important because the 1,000-bhp V12 is the headline engineering achievement, while the electric motors change the car’s total output and response.

Specification Valkyrie V12 Source context
Configuration 65-degree naturally aspirated V12 Aston Martin, 2018
Displacement 6.5 litres Aston Martin, 2018
Engine power 1,000 bhp at 10,500 rpm Aston Martin, 2018
Specific output 153.8 bhp per litre Aston Martin, 2018
Maximum engine speed 11,100 rpm Aston Martin, 2018 release
Peak engine torque 740 Nm at 7,000 rpm Aston Martin, 2018
Engine mass 206 kg Aston Martin, 2018
Hybrid contribution 160 bhp and 280 Nm Aston Martin, 2019
Published system total 1,160 bhp and 900 Nm Aston Martin, 2019

Is the Valkyrie V12 really the largest modern naturally aspirated V12?

It is safer to describe it as one of the most substantial and highly tuned modern naturally aspirated V12s than to claim a verified outright record. The supplied Aston Martin and Cosworth material confirms 6.5 litres, but it does not compare every modern naturally aspirated V12 by displacement. “Largest” can mean the biggest capacity among a defined group, the largest current road-car engine, or simply a large engine by contemporary standards; the sources do not establish which comparison set would support a categorical record.

Popular on Amazon
Sale
LISEN Retractable Car Charger, 84W Car Charger USB C Fast Charge, 4 in 1 | Cigarette Lighter Adapter, Car Accessories, for Christmas Day Gifts for Men Women Dad Mom, for iPhone 18 Pro Max Duo 17 16-11
  • Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
  • Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
  • Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
  • Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
  • Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.

The defensible point is that 6.5 litres is an unusually large capacity for a modern road-going naturally aspirated V12, especially when paired with 153.8 bhp per litre and an 11,100-rpm limit. Those are manufacturer-reported specifications, not an independently audited industry ranking. The engineering story remains compelling without overstating the superlative.

How did Cosworth develop the engine?

Cosworth’s account describes a project that changed ambition and survived a period of inactivity before becoming the Valkyrie’s defining mechanical feature. The company says the early work was known as Project Nebula and began in 2015 as a feasibility study aimed at about 900 bhp. The programme then went into stasis. When it restarted in 2017, the target was raised to clear 1,000 horsepower.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

That reset forced the team to consider the entire package rather than simply increase output. Cosworth says engineers evaluated engine layouts against the Valkyrie’s tight vehicle installation and selected a V12 with a 6.5-litre capacity and an 11,100-rpm brief. The layout delivered the cylinder count and displacement required by the performance target while preserving the character Aston Martin wanted from a naturally aspirated flagship.

Before the full engine ran, Cosworth used a three-cylinder mule, effectively one quarter of the eventual V12. The mule allowed combustion and emissions work to proceed in parallel with the main design. This is a practical way to reduce development risk: combustion behaviour, calibration and after-treatment questions can be investigated on a smaller, cheaper test unit before committing to a complete twelve-cylinder engine.

Cosworth’s project history also reveals an unusual production requirement. The company says the Valkyrie programme called for roughly 100 to 125 engines, a much larger production context than a conventional race-engine assignment. That quantity demanded repeatable manufacturing, inspection and assembly processes while retaining components and tolerances associated with a competition-derived design.

Also popular on Amazon
Sale
Kaistyle for Magsafe Car Mount【Strong Magnet】 Magnetic Phone Holder for Car Phone Holder Mount Dash Mounted Holders Phone Holders for Your Car Accessories for Women Men for iPhone 18 Pro Max 17 16 15
  • ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
  • ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
  • ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
  • ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
  • ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient

Why can a 6.5-litre V12 rev beyond 11,000 rpm?

High engine speed increases the number of combustion events each minute, but it also magnifies piston acceleration, connecting-rod loads, crankshaft stress and friction. A large-displacement engine therefore needs exceptional control of reciprocating mass, stiffness, lubrication and balance if it is to survive at racing-like speeds. Cosworth and Aston Martin’s published hardware choices show how the Valkyrie addresses those demands, even though the public releases do not disclose every dimension or calculation.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Aston Martin says the engine uses titanium connecting rods and F1-specification pistons. Titanium can reduce rod mass compared with conventional steel, lowering the inertia the crankshaft must reverse at each stroke. The piston description signals a design intended for high cylinder pressure and sustained speed rather than a comfort-oriented road engine. Cosworth’s separate piston article discusses a quoted 140-bar peak combustion pressure, but the reviewed material does not establish that page’s publication date; it should therefore be treated cautiously and not as a dated Valkyrie specification.

The crankshaft is another example of the programme’s priorities. Aston Martin says it starts as a 170 mm-diameter, 775 mm-long steel bar. About 80 percent of that billet is machined away, and the company says producing the crank took around six months. Aston Martin also reports that it is 50 percent lighter than the crankshaft used in the One-77 V12. These are Aston Martin’s reported manufacturing figures, not independent measurements.

Reducing mass is only half the problem. A crankshaft that turns beyond 11,000 rpm must remain rigid and accurately balanced, while the block and bearings must carry the resulting loads. The Valkyrie engine is consequently described as a fully stressed structural element: it contributes to the car’s chassis load path instead of being mounted as an isolated, flexible mass. That approach can save supporting structure, but it places greater demands on the engine’s stiffness and on the interfaces connecting it to the monocoque and gearbox.

What do the Valkyrie’s power and torque numbers actually mean?

The V12’s 1,000 bhp is reached at 10,500 rpm, close to its stated 11,100-rpm maximum. Its 740 Nm peak arrives at 7,000 rpm, so maximum power and maximum torque occur at different points in the rev range. That is normal for a naturally aspirated engine: torque reflects cylinder filling at a given speed, while power continues to rise when the engine can maintain useful torque at higher rpm.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
SINGARO Car Cup Holder Coaster, Silicone Cup Holder Insert, Universal Non-Slip Cup Holders, Car Accessories Interior for Women and Man Interior Sets 4 Pack Black
  • High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
  • Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
  • Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
  • Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
  • 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.

The electric system changes the interpretation of the figures. Aston Martin identifies Integral Powertrain Ltd. as the electric-motor supplier and Rimac as the lightweight hybrid-battery supplier. The company quotes 160 bhp of electric power and 280 Nm of electric torque, for 1,160 bhp and 900 Nm combined. Those peak values should not be arithmetically combined as though all peaks occur simultaneously; the published 900-Nm system figure is the manufacturer’s combined peak, while the V12’s 740 Nm and the hybrid system’s 280 Nm are separate component figures.

In practical terms, the hybrid system can supplement the naturally aspirated engine during transient operation and low-speed response, while the V12 supplies the sustained high-rpm character. The official release establishes the component contributions and totals, but does not provide a complete torque-versus-speed map or a detailed control strategy.

How is the road-car engine different from the Valkyrie endurance racer?

The race engine retains the 6.5-litre Cosworth-built V12 concept but is not simply the road calibration transplanted into a competition car. Aston Martin says the endurance version uses a modified lean-burn setup tailored to Hypercar regulations, reliability over long-distance races and fuel efficiency over a stint.

The 2025 race-program release states that the Hypercar class power window is 500 kW, or about 680 bhp. Aston Martin’s Head of Endurance Motorsport, Adam Carter, said the engine is run slower than its capability to meet the required power while improving fuel efficiency. That means the race car does not need, and under the regulations cannot use, the road car’s full 1,000-bhp output.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Comparison point Road Valkyrie Valkyrie endurance version
Engine basis 6.5-litre Cosworth naturally aspirated V12 6.5-litre Cosworth V12, modified for racing
Published power 1,000 bhp from the V12; 1,160 bhp including hybrid assistance Built around a 500 kW (680 bhp) Hypercar power limit
Calibration priority Road emissions compliance, response and maximum performance Lean burn, endurance reliability and fuel economy
Engine speed wording 11,100 rpm maximum in Aston Martin’s 2018 specification Run slower than its capability to satisfy the class power target
Hybrid figures 160 bhp and 280 Nm are published for the road hybrid system The cited race release does not establish that the road hybrid system is used

The 2025 release also describes the Valkyrie as moving from road to track for a Le Mans programme. Aston Martin Lagonda’s 2025 annual report says the car competed in the 24 Hours of Le Mans and calls it the only Hypercar-class car developed directly from its road-going counterpart. That is the company’s description; it does not mean the race engine has the same software, emissions equipment, hybrid integration or operating limits as the road unit.

Also popular on Amazon
4Pcs Car LED Lights Interior Wireless, 7 Colors Interior Car Lights with 6 Bright LED Lamp Beads, Portable USB Rechargeable Car Interior Led Night Light for Car Decor
  • 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
  • Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
  • Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
  • Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
  • Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What does “fully stressed” mean for the Valkyrie chassis?

A fully stressed engine forms part of the structural load path. Instead of attaching the engine to a separate subframe that carries the loads around it, designers use the engine and its mountings as a structural bridge between major chassis components. The potential benefit is lower overall mass and greater stiffness for a given package, but the engine must tolerate chassis loads as well as combustion loads.

That choice helps explain why the Valkyrie programme pursued an unusually light 206 kg engine while still requiring high stiffness. Every kilogram removed from the powertrain can reduce the supporting structure needed elsewhere, provided durability targets are met. Aston Martin’s statements establish the structural role and quoted mass; they do not publish a complete chassis-stiffness comparison or a breakdown of how much mass the architecture saves.

Why is the crankshaft manufacturing story important?

The billet crank illustrates the trade-off between bespoke engineering and production practicality. Starting from a large steel bar and machining away most of it provides control over the final geometry and material integrity, but it consumes time, tooling capacity and expensive machining hours. Aston Martin’s six-month figure shows that the crank was a major manufactured component, not an off-the-shelf part.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For a programme of roughly 100 to 125 engines, such a process is viable because the volumes are low enough to justify specialist work and high enough to require repeatability. It also explains why the Valkyrie V12 should not be judged by the cost or manufacturing logic of a mass-produced engine. The design brief prioritised response, mass and speed first; the production system then had to make those choices consistently in a small series.

What is the clearest way to understand Cosworth’s achievement?

Cosworth’s achievement is not just a big displacement number. It is the integration of a large 6.5-litre V12, very high engine speed, low quoted mass, structural use in the chassis and road-car emissions requirements. The development path—from a 900-bhp feasibility study, through a three-cylinder combustion mule, to a bespoke engine exceeding 1,000 bhp—shows how the result was engineered rather than discovered by modifying an existing motor.

Also popular on Amazon
Sale
Govee Car LED Lights, RGB Smart Car Interior Lights, App Control | DIY Mode and Music Mode, 2 Lines Design LED Lights for Cars with Car Charger, 12V
  • Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
  • Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
  • Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
  • 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
  • Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.

The road and race versions then demonstrate two different definitions of performance. The road car uses hybrid assistance to reach its published 1,160-bhp system total and must satisfy road-use requirements. The endurance car uses lean-burn calibration, a lower operating speed and a 500-kW class window to survive long stints while conserving fuel. Both rely on the same fundamental Cosworth V12 architecture, but they optimise it for different jobs.

Aston Martin’s Dr. Andy Palmer called a high-revving naturally aspirated V12 “the absolute pinnacle” in the company’s 2018 release. That is an attributed opinion, not a measurable engineering conclusion. The measurable case is the combination of 6.5 litres, 1,000 bhp at 10,500 rpm, a stated 11,100-rpm limit and a 206 kg mass—figures that make the Valkyrie engine one of the most technically ambitious modern road-car V12s, without requiring an unverified “largest” record claim.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Frequently Asked Questions

Why don’t the 740 Nm engine figure and 280 Nm hybrid figure add up to 900 Nm?

They are component and system peaks measured under different operating conditions. Maximum engine torque, maximum electric-motor torque and maximum combined torque do not necessarily occur at the same instant, so the manufacturer’s 900-Nm system figure should be treated as its own peak value.

Does the 11,100-rpm figure apply to every Valkyrie version?

The 11,100-rpm maximum comes from Aston Martin’s 2018 road-engine announcement. A 2025 race release describes the road version as revving to 11,000 rpm and says the endurance engine is operated below its capability, so the figures should be quoted with their dates and versions rather than silently merged.

Was the Valkyrie V12 adapted from an older Aston Martin engine?

No. Cosworth describes it as a clean-sheet, bespoke programme known initially as Project Nebula. The development used a dedicated three-cylinder mule and a new production plan rather than a conventional upgrade of an existing road engine.

Why does the endurance car use lean-burn combustion?

Lean-burn calibration helps the race engine meet the Hypercar power window while reducing fuel use over a stint. Aston Martin also cites endurance reliability as a reason for modifying the road-oriented calibration.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 12:25 pm GMT+0530.

Read next

Thanks for visiting Carcody

Carcody.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.co

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Crashes, No Sound, or Screen Glitches?Free driver scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.