Recommended Free Tools
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
For a Honda X-Blade BS6, replace the engine oil at 1,000 km for the first change, then every 6,000 km after that. Honda’s rule is also time-based: follow the exact owner manual and service the motorcycle at whichever comes first, the odometer interval or the specified number of months. The 1,000-km and 6,000-km pattern appears in Honda’s current motorcycle guidance and the X-Blade maintenance table. Before buying oil or booking service, confirm the manual for your exact India model year or the first eight characters of its VIN through Honda’s owner-manual portal.
What is the Honda X-Blade BS6 engine-oil interval?
The schedule is straightforward:
| Odometer point | What to do |
|---|---|
| 1,000 km | Replace the engine oil for the first service. |
| 6,000 km | Replace the oil again. |
| 12,000 km | Replace the oil again. |
| Every 6,000 km thereafter | Continue replacing the oil at 18,000 km, 24,000 km and so on. |
Honda’s published guidance says, “The first replacement is due at 1,000 km, followed by replacements every 6,000 km thereafter.” The X-Blade owner manual follows the same mileage pattern. The manual also says to service according to odometer reading or months, whichever is earlier, so a motorcycle that travels very few kilometres still needs calendar-based servicing.
As an Amazon Associate I earn from qualifying purchases.
Do not assume that the next change is always exactly 6,000 km after the last workshop visit if the motorcycle has missed a calendar limit. Read the month column in the manual for your vehicle and use the earlier trigger. If your motorcycle has a different model-year manual, that document takes priority over a generic internet answer.
How can I confirm the correct manual for my BS6 X-Blade?
“X-Blade BS6” covers motorcycles sold in different years and markets, and manuals can be revised. Honda’s Download Honda Owner Manual for Two-Wheelers page provides a model/year or VIN-based route. Use the first eight VIN characters when the portal asks for them, then check the maintenance table and oil specification in the downloaded manual.
Popular on Amazon
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
Keep the PDF or a printed copy with your service records. If a dealer’s service reminder differs from a manual, ask the service adviser to identify the model-year schedule being used rather than relying on a verbal estimate.
Which oil specification does the X-Blade manual require?
The cited X-Blade manual specifies a four-stroke motorcycle oil meeting all of these requirements:
- SAE viscosity: 5W-30 or 10W-30
- JASO: T 903 MA
- API performance level: SJ or higher
- Restriction: avoid oils labelled “Energy Conserving” or “Resource Conserving”
Viscosity and performance category are separate checks. A bottle marked 10W-30 is not automatically suitable unless its label also shows the required motorcycle-clutch specification and API level. JASO MA is important because the X-Blade uses a shared engine and wet-clutch oil environment; automotive friction-modifier labels can be unsuitable.
Honda India lists Pro Honda 5W30 MA motorcycle engine oil as developed for BS6 Honda motorcycle engines. Honda lists that product as SAE 5W30, JASO MA and API SL. API SL is above the manual’s SJ minimum, but always match the exact manual for your motorcycle and check the container’s current label before purchase.
Also popular on Amazon
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
How much oil does an X-Blade need?
The owner manual lists two capacities:
- About 1.0 litre after draining
- About 1.2 litres after complete disassembly
These are not interchangeable fill targets. A routine oil change is the draining case, so begin with the manual’s approximately 1.0-litre figure and finish by checking the dipstick. Complete engine disassembly is a workshop rebuild condition and is not a reason to pour 1.2 litres into an ordinary service.
Buy enough oil for the specified fill, but do not empty a larger container automatically. Small differences remain in the crankcase and passages after draining, and the final level must be set using the dipstick on a level, upright motorcycle. Overfilling can cause its own problems; the dipstick reading, not the bottle’s remaining volume, is the final check.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →How do I check the X-Blade engine-oil level correctly?
Honda recommends including an oil-level inspection in the pre-ride check. The check is simple, but the sequence matters because a cold, recently stopped or leaning motorcycle can give a misleading reading.
- Start with a cold engine and let it idle for 3–5 minutes.
- Switch the engine off and wait 2–3 minutes for oil to settle.
- Park on a firm, level surface and hold the motorcycle upright.
- Remove the dipstick, wipe it clean, and reinsert it without screwing it in.
- Remove it again and confirm that the oil is between the upper and lower marks.
If the level is near or below the lower mark, add the correct specification oil in small amounts and repeat the check. If the level is above the upper mark, do not ride assuming that more oil is better; have excess removed. A sudden drop, wet engine case, oil on the ground or repeated need for top-ups warrants inspection for a leak or an engine issue.
Also popular on Amazon
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
How is an X-Blade oil change performed?
Honda’s manual says the change requires special tools and recommends dealer service unless the owner has the necessary tools and mechanical skill. A competent home mechanic should have the exact manual, the specified oil, a drain pan, a replacement sealing washer, a suitable wrench and a way to tighten the drain bolt accurately.
- Prepare safely. Work on a stable, level surface with the motorcycle supported securely. Keep the drain pan ready and prevent dirt from entering the filler opening.
- Warm and stop the engine. Follow the same short warm-up and settling approach used for the level check. Hot oil can burn, so use gloves and allow enough cooling to work safely.
- Drain the old oil. Place the pan under the drain bolt, remove the bolt carefully and let the oil drain fully. Account for the hot exhaust and nearby components.
- Fit a new sealing washer. The manual calls for a new washer rather than reusing a flattened one, which helps the drain-bolt joint seal correctly.
- Reinstall the drain bolt. The manual lists a drain-bolt torque of 30 N·m. Use a calibrated torque wrench and the manual’s tightening procedure; do not guess by feel.
- Add the replacement oil. Start with the routine drain quantity, approximately 1.0 litre, using only oil that meets the stated SAE, JASO and API requirements.
- Verify the level. Run the level-check procedure: idle briefly, stop, wait 2–3 minutes, keep the bike upright and read the dipstick with it inserted but not screwed in.
- Check for leaks. Inspect around the drain bolt and any disturbed sealing surface while the engine is running briefly and again after it is stopped. Wipe away residue so a new leak is easy to spot.
- Record the service. Note the date, odometer, oil grade and quantity, and retain receipts. Honda advises keeping service records.
Dispose of used oil through a workshop, service station or local hazardous-waste collection point. Do not pour it onto soil, into a drain or into household rubbish.
Should I use a Honda dealer or change the oil at home?
Dealer service is the lower-risk choice when you lack a torque wrench, suitable support, spill-control equipment or confidence identifying the correct oil. Honda says scheduled maintenance should be carried out by properly trained and equipped technicians, and an authorised workshop can update the service record while checking for other items due at the same interval.
A home change can be reasonable for an experienced mechanic who can follow the manual precisely. The decision is not just about the price of a litre of oil. Compare these factors:
Also popular on Amazon
- 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
- Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
- Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
- Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
- Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.
| Factor | Authorised service | Home change |
|---|---|---|
| Tools and skill | Technician has the specified equipment and torque tools. | You must provide safe support, a drain pan and accurate torque control. |
| Oil compliance | Ask the workshop to identify the SAE, JASO and API grade on the job card. | You must read the bottle and avoid Energy Conserving or Resource Conserving labels. |
| Sealing washer and leak check | Workshop supplies and fits the washer and checks the joint. | You must replace the washer, torque the bolt to 30 N·m and inspect afterward. |
| Records | Usually provides an invoice and service entry. | Keep dated receipts, odometer notes and the oil container details. |
| Other maintenance | Technician can identify related scheduled items. | You must consult the maintenance table and inspect each item yourself. |
Warranty and documentation questions depend on the terms supplied with your motorcycle and the records Honda or its dealer accepts. Follow the manual’s schedule, retain evidence of maintenance and ask the dealer how a self-performed oil change would be documented before choosing that route.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What if my X-Blade is past the 1,000-km or 6,000-km point?
Arrange the oil change as soon as possible rather than waiting for the next 6,000-km milestone. Tell the workshop the current odometer reading and the last known service date, and ask them to establish the next mileage and calendar reminders from the completed service.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesIf the motorcycle has been stored for a long period, use the earlier month rule in the manual even when the odometer has barely moved. If the oil warning light appears, the engine sounds abnormal, the oil level is very low or a leak is visible, stop riding and seek qualified assistance instead of treating the regular interval as permission to continue.
What common mistakes should X-Blade owners avoid?
- Using only mileage: the manual uses mileage or months, whichever comes first.
- Buying car oil by viscosity alone: check JASO MA and the API requirement, and avoid the prohibited energy/resource-conserving labels.
- Pouring in 1.2 litres for every change: 1.2 litres is the complete-disassembly figure; routine draining is approximately 1.0 litre, followed by a dipstick check.
- Reading the dipstick with the bike leaning: keep the motorcycle upright on level ground.
- Screwing in the dipstick for the reading: Honda’s check procedure says to insert it without screwing it in.
- Reusing the sealing washer: fit a new one during the drain-bolt installation.
- Guessing drain-bolt tightness: the manual lists 30 N·m; use a torque wrench.
- Skipping leak inspection: check immediately after the change and again before normal riding.
- Losing service proof: keep invoices and a dated odometer record.
What is the short answer for an X-Blade BS6 owner?
Change the oil at 1,000 km, then every 6,000 km, while observing the earlier month limit in your exact manual. Use SAE 5W-30 or 10W-30 motorcycle oil meeting JASO T 903 MA and API SJ or higher, avoid Energy Conserving and Resource Conserving oils, and treat approximately 1.0 litre as the routine drain quantity. Confirm the level with the dipstick and use an authorised technician when you do not have the tools or skill to replace the washer, torque the drain bolt and verify leaks.
Also popular on Amazon
- Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
- Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
- Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
- 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
- Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.
For model-specific confirmation, use Honda’s owner-manual lookup. Honda’s general oil-level procedure is also described in its guide to checking a motorcycle engine-oil level.
Frequently Asked Questions
Can I wait until 6,000 km if the first service was delayed?
No. Arrange the first oil replacement as soon as you discover it was missed, then reset the future schedule from the actual service record and the manual’s month rule. Continuing to ride to 6,000 km adds avoidable operating time on the original oil.
Is 10W-40 oil suitable for the X-Blade BS6?
The cited X-Blade manual lists SAE 5W-30 or 10W-30, not 10W-40. Use the viscosity and classifications printed in your exact model-year manual rather than substituting a thicker grade because it is commonly sold.
Does an oil change include an oil-filter replacement?
The supplied X-Blade interval information specifies the oil replacement schedule but does not establish a separate filter-change instruction. Check the maintenance table for your exact VIN-based manual or ask the authorised workshop what filter service is due at that visit.
How often should I check the oil between services?
Honda recommends checking engine oil as part of the pre-ride inspection. Make the check especially important before long rides, after noticing a leak or when the engine has required repeated top-ups.




