Black Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsSlow PC?RecommendedPC slow today? Run a repair scan before it gets worseResolve common Windows issues and optimize system performance.Scan NowBlack Friday PreviewAmazon USThe best pick may show up before FridayAmazon US: current deals, useful picks and tech finds.See Picks×
Get listed

11 MIN

Ferrari 308 GTB vs modern restomods: what actually changes?

A factory Ferrari 308 GTB, Maturo’s donor-based 308 Stradale and Michelotto’s new Gruppo 4 Tributo share a visual idea but differ radically in chassis, engine, weight, authenticity and price.

By CarCody Team

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

A factory Ferrari 308 GTB and a modern 308 tribute can share the same wedge-shaped outline yet be fundamentally different cars. The original is a 1975–1985 transverse mid-engine Ferrari built around a steel tubular chassis and a 2.9-litre V8; the Maturo 308 Stradale rebuilds a real 308 donor, while the Michelotto Gruppo 4 Tributo is an entirely new carbon-bodied, tubular-frame car. The choice is therefore not simply old versus new: it is authentic collector Ferrari versus re-engineered Ferrari versus clean-sheet homage.

The original European carbureted GTB makes 255 cv. Maturo reports 405 hp from its naturally aspirated 3.0-litre rebuild at €425,000 before the donor. Michelotto’s new car is reported at 375 hp, 950 kg and more than €450,000. Those figures describe three different engineering philosophies, not three trim levels of one model.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
At a glance
Name Best for Key spec Free plan / price Platforms Checked
European carbureted Ferrari 308 GTB Factory authenticity and collectability 2,927 cc V8, 255 cv, five-speed manual Collector-market car; examples range from about €176,988 auction results to €218,500–€269,900 for notable vetroresina cars Original steel tubular chassis; fiberglass or steel body November 2026
Maturo 308 Stradale Modernized driving of a genuine 308 donor Naturally aspirated 3.0-litre V8, reported 405 hp; original chassis and gearbox retained €425,000, excluding the donor Reinforced original 308 chassis with cage and 150-plus added welds November 2026
Michelotto Gruppo 4 Tributo A new rally-inspired car with 308 design language 3.4-litre naturally aspirated V8, 375 hp, 950 kg, five-speed manual Estimated above €450,000; production described as fewer than 50 New high-strength tubular frame, integral cage and bespoke carbon body November 2026

What is a factory Ferrari 308 GTB?

The 308 GTB is Ferrari’s two-seat berlinetta introduced at the 1975 Paris show. Pininfarina designed the shape, Scaglietti produced the early composite shells, and Ferrari mounted a light-alloy V8 transversely behind the cabin. Ferrari’s anniversary account describes the engine as a 3.0-litre unit with 255 cv for European cars, with optional sports exhaust, high-compression pistons and high-lift camshafts able to raise the output. The company’s description is available in its 50-year history of the 308 GTB.

The underlying architecture is period sports-car hardware: a steel tubular chassis, independent double-wishbone suspension, coil springs, hydraulic dampers, ventilated disc brakes and a ZF five-speed manual driving the rear wheels through a limited-slip differential. First gear is down and to the left in the classic dogleg pattern. Early wheels were 7.5 x 14 inches with 205/70 VR14 tyres; published brake dimensions are 272 mm front and 277 mm rear.

Popular on Amazon
Sale
LISEN Retractable Car Charger, 84W Car Charger USB C Fast Charge, 4 in 1 | Cigarette Lighter Adapter, Car Accessories, for Christmas Day Gifts for Men Women Dad Mom, for iPhone 18 Pro Max Duo 17 16-11
  • Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
  • Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
  • Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
  • Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
  • Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.

Dimensions vary for U.S.-bumper cars, but the standard European figures are 4,230 mm long, 1,720 mm wide, 1,120 mm high and 2,340 mm between the axles. That wheelbase is 21 cm shorter than the related 308 GT4’s 2.55 metres. The 308 GTB was also the first Ferrari developed in Pininfarina’s wind tunnel, according to evo’s historical and buying guide.

Why are there several mechanically different 308 GTBs?

“308 GTB” identifies a family, not one fixed specification. Body material, fuel system, lubrication and cylinder-head design changed during the ten-year run.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Version Period and hardware Published output Important qualification
European carbureted GTB 1975–1980; four Weber 40 DCNF twin-choke carburettors, two valves per cylinder 255 cv (Ferrari); English sources often show 252 bhp or 255 PS Early European cars used dry-sump lubrication. Rating-system differences explain the apparently conflicting figures.
U.S. carbureted GTB 1976–1980; emissions equipment and market-specific tuning About 230–240 hp in the better-supported cluster Some launch summaries print 205 bhp, a figure more consistently associated with later injected U.S. cars.
308 GTBi 1980–1982; Bosch K-Jetronic injection, two valves per cylinder About 214 hp Europe, 205 hp U.S. The transition is best described as 1980–1981 rather than a single universal model-year change; wet-sump lubrication became the general arrangement.
308 Quattrovalvole 1982–1985; four valves per cylinder and fuel injection About 240 hp Europe; U.S. figures are commonly listed around 235 hp It is the strongest regular injected GTB, but it does not equal the European carbureted peak on the cited figures.

The 255-cv headline is Ferrari’s rating for European cars. A source showing 252 bhp is generally converting 255 PS into imperial horsepower; Italian references that show 255 CV SAE and 230 CV DIN are using different test standards. These are not extra engines.

What does “vetroresina” mean, and how rare is it?

Vetroresina means fiberglass. The earliest GTBs used a fiberglass body with only the front lid in aluminium. Ferrari gradually moved to steel and aluminium from late 1976; contemporary accounts place the end of fiberglass moulding around June or July 1977, while noting that some markets received steel cars earlier. The most defensible reading is a transition period, not one date that fits every market.

Ferrari says a fiberglass car can show a small indentation where the windscreen A-pillar meets the roof. Another visual clue cited in specialist descriptions is reversing lamps mounted in the bumper rather than in the indicator clusters. Neither clue replaces a chassis-history check.

The production count is genuinely unsettled. Ferrari’s 2025 article confirms 2,897 carbureted GTB cars and 12,149 308 berlinettas and open cars of all 3.0-litre versions by the end of 1985, excluding the related 2.0-litre 208. The commonly repeated split is 712 fiberglass GTBs and 2,185 steel carbureted GTBs, which adds exactly to 2,897. Other specialist accounts cite 808 fiberglass cars, sometimes attributing that number to factory records while assigning 712 to historian Marcel Massini. No single official census resolves the difference, so both figures should be reported rather than averaged.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Both the 712 and 808 counts include right-hand-drive cars in secondary-source estimates; 154 right-hand-drive vetroresina examples is the figure repeated by two such accounts. A specific car’s identity still depends on its chassis record, body details and provenance.

Also popular on Amazon
Sale
Kaistyle for Magsafe Car Mount【Strong Magnet】 Magnetic Phone Holder for Car Phone Holder Mount Dash Mounted Holders Phone Holders for Your Car Accessories for Women Men for iPhone 18 Pro Max 17 16 15
  • ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
  • ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
  • ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
  • ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
  • ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient

How fast and light was the original?

Published weights are not directly comparable because some are dry and others are curb figures. Vetroresina dry weights are reported around 1,050–1,090 kg, while steel-bodied cars are often described as roughly 150 kg heavier. An all-family range of about 1,090–1,303 kg covers the later and open cars. One guide lists approximately 1,250 kg for a vetroresina car, which belongs with heavier curb-weight data rather than the dry-weight cluster.

Early European performance claims cluster around 6.4–6.7 seconds to 60 mph and 252 km/h (157 mph). One period account attributed a measured 154 mph to Paul Frère; that is a historical attribution reproduced by a later guide, not a current comparison test. No cited source instrumented a standard GTB against either modern build.

The character is correspondingly high-revving rather than torque-heavy. The 2,927 cc Tipo F106 V8 has an 81.0 mm bore, 71.0 mm stroke, 90-degree bank angle and two camshafts per bank. Carbureted European cars use an 8.8:1 compression ratio in one detailed specification, with 284 Nm (209 lb-ft) at 5,000 rpm in the same source.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What does the Maturo 308 Stradale change?

The Maturo 308 Stradale is the donor-car restomod in this comparison. A July 2026 report from Radar.gr says the Dutch builder strips a genuine 308 GTB, keeps its original chassis and naturally aspirated 3.0-litre V8 concept, and reinforces the structure rather than replacing the car with a new platform.

Structure and suspension

Maturo adds a roll cage and more than 150 structural welds, then fits adjustable TracTive suspension, modern brakes and a limited-slip differential. Wider Group 4-inspired wheel arches and LED lighting are the principal visible changes. The report says the builder deliberately preserves the low body, clean lines and original proportions instead of turning the 308 into a radically different shape.

Engine and transmission

New camshafts, revised ignition, a purpose-built intake and a Capristo exhaust are credited with the reported 405 hp. There is no turbocharger; Maturo’s stated aim is to retain naturally aspirated response and the sound of a classic Ferrari V8. The original five-speed manual is strengthened and recalibrated rather than replaced by a six-speed or dual-clutch transmission.

Against Ferrari’s 255-cv European figure, 405 hp is roughly 150 horsepower more, or about 59 percent above the original claim. Radar’s suggestion that this is “almost more than double” is not supported by that arithmetic and should not be used as a specification.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
SINGARO Car Cup Holder Coaster, Silicone Cup Holder Insert, Universal Non-Slip Cup Holders, Car Accessories Interior for Women and Man Interior Sets 4 Pack Black
  • High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
  • Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
  • Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
  • Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
  • 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.

Price and missing information

The reported price is €425,000, checked November 2026, excluding the donor Ferrari. The buyer therefore needs a suitable 308 as well as the conversion budget. The report does not establish curb weight, acceleration, top speed, production volume, wheel and tyre sizes, brake diameters or whether the engine remains standard Tipo F106 displacement in every detail.

Maturo also offers a 308 Rally with the same reinforced-chassis philosophy and a reported output above 300 hp. The cited report does not provide a separate Rally price, so the €425,000 figure should not be presented as a confirmed price for both variants.

Why is the Michelotto Gruppo 4 Tributo not a 308 restomod?

The Michelotto Gruppo 4 Tributo starts without a donor 308. Motor1 describes it as “not a restomod bolted onto an old 308” but an entirely new machine, and says its tubular steel frame with integrated roll cage has nothing in common with the original chassis. Motor1’s report and a companion account from Motorimagazine place the debut in Padova in October 2026.

New chassis, carbon body

The structure uses high-strength tubular steel with front and rear roll bars for rally safety. Its carbon-composite body evokes the 308’s wedge and pop-up-headlight idea without copying every original panel; Motorimagazine says each body is made for the individual car. This is a modern chassis wearing 308-inspired design language, not a refurbished Ferrari shell.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Engine, gearbox and running gear

The car uses a naturally aspirated 3.4-litre V8 developed internally by Michelotto, not an identified Ferrari F106. Motor1 reports 375 horsepower at 8,250 rpm and 268 lb-ft, with no turbocharger or hybrid assistance. Motorimagazine gives about 380 CV at the same engine speed; those are effectively the same output expressed in different horsepower units.

A five-speed manual gearbox has a gated shifter, dogleg first gear and rear-wheel drive. Adjustable front and rear dampers and anti-roll bars work with four-piston calipers on ventilated discs. The cabin has a three-spoke steering wheel and digital instruments but no touchscreen, deliberately avoiding both a restored 1970s dashboard and a screen-heavy modern interior.

Weight, price and scale

Motor1 quotes 2,094 lb (950 kg) with every fluid aboard except gasoline. At those cited figures, 375 hp works out to roughly 179 hp per 1,000 lb. A European carbureted car using 252 bhp and 1,090 kg works out to about 105 hp per 1,000 lb. That is a calculation from published specifications, not a lap-time or acceleration result.

Also popular on Amazon
4Pcs Car LED Lights Interior Wireless, 7 Colors Interior Car Lights with 6 Bright LED Lamp Beads, Portable USB Rechargeable Car Interior Led Night Light for Car Decor
  • 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
  • Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
  • Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
  • Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
  • Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.

Motorimagazine estimates a price above €450,000 and production below 50 cars because each chassis and carbon body is bespoke. Motor1 confirms very limited production but does not confirm either the price or the numerical cap. The launch reports also do not settle road-registration arrangements, so buyers must verify the legal position in their own country.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How do the three cars compare mechanically?

Core engineering differences
Area Factory European carbureted GTB Maturo 308 Stradale Michelotto Gruppo 4 Tributo
Starting point Factory Ferrari built 1975–1980 Real 308 GTB donor Clean-sheet homage with no donor
Chassis Steel tubular Ferrari chassis Original chassis, cage and 150-plus extra welds New high-strength tubular frame and integral cage
Body Early fiberglass; later steel/glassfibre with aluminium bonnet Original proportions, wider Group 4-style arches and LED lamps Bespoke carbon composite
Engine 2,927 cc Tipo F106 V8, four Webers, 255 cv Naturally aspirated 3.0-litre V8, reported 405 hp Naturally aspirated 3.4-litre V8, 375 hp at 8,250 rpm
Gearbox ZF five-speed manual, dogleg, limited-slip differential Strengthened original five-speed manual; limited-slip differential Five-speed manual, gated, dogleg first; source does not identify it as a 308 ZF unit
Weight About 1,050–1,090 kg dry for early fiberglass cars Not published in the cited report 950 kg with fluids except fuel
Price Collector-market values vary by version and condition €425,000 excluding donor Estimated above €450,000; under-50 run is an outlet estimate
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Which one suits a collector, a driver or a rally enthusiast?

Choose the factory GTB if the object is Ferrari history. The early fiberglass cars offer the greatest rarity and the lightest published factory configuration, while steel carbureted, injected and Quattrovalvole cars provide a wider range of purchase prices and mechanical identities. Originality, documented chassis history and correct specification matter more than a headline horsepower number.

Choose the Maturo Stradale if the buyer wants a real Ferrari 308 underneath but expects modern structural stiffness, damping, braking and substantially more power. It is still constrained by donor condition, donor availability and the cost of rebuilding an old chassis. Its €425,000 price is a conversion fee, not an all-in turnkey budget.

Choose the Michelotto Tributo if the priority is a newly engineered, lightweight machine with rally pedigree and 308-inspired styling. It offers the clearest break from period limitations, but it is not a Ferrari 308 chassis, may not carry the same factory-identity value, and has a price and production estimate that require direct confirmation from the builder or seller.

What do original 308s cost in the 2026 market?

Published guides and auction results show why “the price of a 308” is too vague. Classic & Sports Car’s buyer’s guide, checked November 2026, lists restoration, average and show-condition bands as follows:

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Guide bands, checked November 2026
Version Restoration Average Show
Injection £28,000 £42,000 £75,000
Steel, Weber carburettors £30,000 £48,000 £85,000
Quattrovalvole £35,000 £60,000 £100,000
Vetroresina £50,000 £100,000 £175,000

The guide says GTS versions command slightly more in restoration and average condition. These are guide bands, not guaranteed transaction prices.

CarJager’s November 2026 market summary records a 308 GTSi offered at €78,900 in October 2026, €176,988 for a 1977 car at Artcurial on 15 March 2026, €218,500 for a 1976 Classiche-certified vetroresina at RM Sotheby’s Munich on 18 October 2025, and about €269,900 for a 1976 vetroresina restored in 2025 and sold at RM Sotheby’s Monterey. Its dollar conversions use the European Central Bank rate of 13 October 2026. These figures are market markers for different cars, not a single price curve.

Also popular on Amazon
Sale
Govee Car LED Lights, RGB Smart Car Interior Lights, App Control | DIY Mode and Music Mode, 2 Lines Design LED Lights for Cars with Car Charger, 12V
  • Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
  • Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
  • Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
  • 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
  • Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.

A 308 that is roughly 45 years old will usually have a history of partial rebuilding. Buyers need to establish how the chassis, body, suspension, brakes, engine and belts were addressed, rather than assuming that a high asking price means a complete mechanical restoration. A 2026 belt service appears in one sale listing, but no universal factory belt interval is established in the available records.

Is the television Ferrari a 308 GTB?

No. The familiar television association is with a Ferrari 308 GTS, the open targa-bodied car, not the GTB coupe. The GTS debuted for 1977 and stores its roof behind the seats. It belongs to the same 308 family and shares much of the mechanical story, but its body style and production totals are separate from the berlinetta in this comparison.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What is the practical verdict?

The original 308 GTB is a specific period Ferrari whose details change dramatically by year and market. Maturo modernizes that original architecture while preserving the donor identity. Michelotto keeps the visual and rally idea but replaces the Ferrari’s chassis, body and engine with a new machine. The 405-hp donor restomod and the 375-hp, 950-kg tribute are therefore not like-for-like upgrades, and neither is a substitute for a correctly identified 255-cv factory car when originality is the goal.

How we compared them

The comparison uses Ferrari’s factory history, specialist buyer’s guides, dated auction and market references, and the two 2026 modern-build reports. The deciding criteria were starting platform, chassis originality, body construction, engine identity, power delivery, weight, gearbox, price inclusions, production claims and the buyer’s likely priority: collector authenticity, modernized donor-car driving or a newly engineered rally homage. Where sources disagree—especially fiberglass totals, horsepower ratings and modern-build pricing—the disagreement is stated instead of hidden.

Frequently Asked Questions

How can I verify that a 308 is a genuine vetroresina?

Look for the period body clues, including the small indentation between the windscreen A-pillar and roof and the bumper-mounted reversing lamps, then confirm the chassis and factory records. Fiberglass appearance alone is not proof because bodies can be repaired or replaced.

Is the 308 GTB’s dogleg gearbox the same in every modern tribute?

No. The factory car uses a ZF five-speed, and the Maturo report says its original five-speed is strengthened. The Michelotto car has a dogleg five-speed manual too, but the published reports do not identify it as a rebuilt Ferrari ZF unit.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Can the Michelotto Gruppo 4 Tributo be registered for road use?

The supplied launch reports do not establish a universal road-registration approval. A buyer must confirm homologation, emissions, lighting and registration requirements with the builder and the relevant authority before treating it as a road car.

Does Ferrari Classiche certification automatically transfer to a restomod?

No assumption is safe. Classiche is mentioned as a selling point for an unmodified 1976 vetroresina, not as a credential for a welded Maturo conversion or the new Michelotto chassis. Certification status should be checked for the individual car and its specification.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 12:25 pm GMT+0530.

Read next

Thanks for visiting Carcody

Carcody.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.co

Recommended PC Tool
Recommended PC Tool
Outdated Drivers Are Slowing You DownFree scan - exact matches
PC Slower Than It Used to Be?Free scan - under a minute

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.