Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Chrysler race teams really did use acid dipping—also called chemical milling—to remove metal from selected race-car body shells. The treatment was one part of a much larger weight-saving program, not a process that dissolved complete cars or applied identically to every Chrysler racer. The best-documented examples are the 1965 altered-wheelbase Dodge and Plymouth A/FX drag cars and Chrysler’s separate 1970 Trans-Am Barracuda and Challenger effort.
Acid could make a steel shell dramatically lighter, but it also created serious trade-offs: weakened panels, roof damage in crashes or inspections, and recollections of acid continuing to attack steel beneath the paint. Here is what the surviving accounts establish, what they leave uncertain, and why these cars became a foundational chapter in Funny Car history.
As an Amazon Associate I earn from qualifying purchases.
Did Chrysler really dissolve cars in acid?
Yes—but “dissolve” is a dramatic shorthand for chemically removing a controlled amount of metal from a body shell. The cars were not complete automobiles lowered into a tank until nothing remained. Chrysler-related teams sent stripped, production-line body-in-white shells to an aircraft or specialist supplier, where an acid treatment removed material from the steel. The shells were then returned for race preparation.
The process is generally called acid dipping or chemical milling. It resembles the weight-reduction methods used in aircraft manufacturing: a chemical bath attacks exposed metal, while areas that must remain intact are protected. The historical sources do not provide a single Chrysler recipe, immersion time, or thickness specification, so it would be misleading to describe one universal procedure for every car.
Popular on Amazon
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
Two programs are often blended together in retellings:
- 1965 A/FX drag racers: altered-wheelbase Dodge and Plymouth hardtops built for straight-line competition and match racing.
- 1970 Trans-Am racers: Barracuda and Challenger shells prepared for road racing by All American Racers under Chrysler’s factory effort.
Both used acid-treated body shells, but they served different classes, different handling goals, and different technical rules. A weight figure or failure anecdote from one program cannot automatically be assigned to the other.
Why did Chrysler acid-dip race cars?
The purpose was simple: reduce mass without abandoning the recognizable production body required by the class or series. A lighter car needs less force to accelerate, and in drag racing every pound removed from the body can improve the launch and quarter-mile performance if traction and power are available. In road racing, lower mass can help braking, tire load, direction changes and overall balance.
Acid dipping was only one tool. The 1965 cars also received radical wheelbase changes and other lightweight construction work. The 1970 Trans-Am shells were fitted with substantial roll cages and race equipment that added weight back for safety and stiffness. In other words, “acid-dipped” describes a body-preparation step, not a complete specification or a guarantee of a particular race weight.
How did acid dipping make a car lighter?
A factory body shell contains more steel than a race team needs for a competition car. It must survive ordinary road use, corrosion exposure, noise and vibration requirements, and mass-production tolerances. Chemical milling can remove some of that excess material evenly over large areas, including inner panels and sections that are difficult to thin with conventional hand tools.
Once the shell was returned, race shops still had to remove or replace components, weld in reinforcements, add a cage and prepare mounting points for racing hardware. The final mass depended on the shell’s starting condition, how aggressively it had been treated, which panels were retained and what the rules required. That is why a single number should not be presented as the reduction for every Chrysler racer.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Also popular on Amazon
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
The best-known figure comes from the Ramchargers’ team history. It says eleven 1965 A990 Dodge and Plymouth hardtops came back from the California acid-dipping operation approximately 200 pounds lighter. That is a reported result for the cars and scope described by the Ramchargers—not a factory specification for all A/FX cars and not a measurement that can be transferred to the 1970 Trans-Am shells. The account is available in the Ramchargers’ history of the program.
What happened to the 1965 A/FX Dodge and Plymouth cars?
Chrysler’s 1965 drag-racing experiment began with production hardtops transformed into altered-wheelbase machines. According to the Ramchargers account, a 1965 Dodge Coronet had its front wheels moved about 10 inches forward and its rear axle about 15 inches forward. The resulting proportions pushed the wheels toward the ends of the body and shifted mass distribution for launch performance.
The Ramchargers describe eleven A990 hardtops—six Dodges and five Plymouths—pulled from the Los Angeles plant. They were prepared as body-in-white shells, sent to a Southern California aircraft supplier for acid dipping, and returned approximately 200 pounds lighter. Conversion work then took place in Michigan before the cars were distributed to selected Chrysler racing teams.
Another Chrysler A/FX account describes a twelve-car effort and cites a 110-inch wheelbase. The difference between eleven A990 hardtops in the Ramchargers’ account and twelve A/FX cars in the Tidewater Mopar Club’s historical article may reflect different counting boundaries: one source may be counting a particular batch of production shells, while the other counts the broader Chrysler-directed A/FX program. The surviving material does not resolve that discrepancy, so a careful account should identify the source and category rather than announce one definitive total.
The Ecurie history of the Plymouth Haulin’ Hemi II describes the same basic recipe: front wheels moved forward 10 inches, the rear axle moved 15 inches, and the body acid-dipped in California before the car was converted near Detroit. These were not mildly modified street cars. They were purpose-built match-racing weapons that retained a production-car identity while exploiting the rules and spectacle of A/FX competition.
Why move the axles as well as remove metal?
Acid dipping reduced body mass; the altered wheelbase addressed where that mass sat. Moving the front wheels forward and the rear axle forward changed the car’s weight distribution, engine-to-axle relationship and launch behavior. It also created the unmistakable long-nose, rear-set-cabin appearance that made the cars look almost cartoonish compared with showroom hardtops.
Also popular on Amazon
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
The changes required extensive structural work. A race shop had to reposition suspension pick-up points, driveshaft and exhaust arrangements, steering components, brake plumbing and wheel openings. The body was cut and rebuilt around the new geometry, so the acid bath was never the whole transformation. It was an early step in a conversion that combined body surgery, lightweight parts, high-output engines and specialized drag-racing setup.
What happened to the cars after the acid bath?
The accounts describe both performance gains and uncomfortable consequences. The most serious warning concerns structural strength. The Ramchargers’ history recounts a rollover in which the thin, acid-dipped steel roof collapsed. That anecdote is a reminder that removing material from a load-bearing shell can reduce crash protection unless the race team restores stiffness with a cage or other reinforcement.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallThe same history says residual acid continued to affect the steel and that paint later bubbled off. The National Hot Rod Association’s retrospective “Cleaning out the Inbox” repeats related recollections and points readers toward the Ramchargers’ team book. These are historical recollections, not a laboratory finding that every acid-treated Chrysler body suffered the same failure. Contamination, rinsing, neutralization, storage and the exact treatment could all have affected the outcome.
For a race team, the practical lesson was severe: a shell could return lighter but require immediate inspection, cleaning, repair and reinforcement. A bubbling finish was not merely cosmetic if chemical residue was still attacking the substrate. A compromised roof or weakened seam could turn a weight-saving measure into a safety liability.
How were the 1970 Trans-Am cars different?
Chrysler’s 1970 Trans-Am effort was a separate road-racing program, not a continuation of the 1965 A/FX drag-car build. Revs Institute’s account of the Barracudas and Challenger says the bodies began as production-line “body in white” shells and were acid-dipped to reduce weight before All American Racers developed them for the series.
The road-racing cars exposed the structural cost of extreme thinning in a different way. Revs Institute reports that at least one shell returned with holes in its roof. A full roll cage was then used to recover rigidity and provide crash protection. Before the season opener, Sam Posey’s Challenger reportedly developed a dimple in the roof during inspection; the roof was replaced rather than accepted as-is. The account appears in Revs Institute’s history of the 1970 Trans-Am Barracudas and Challenger.
Free tools Windows power users keep installed
One-click scans. No signup required.
Also popular on Amazon
- 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
- Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
- Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
- Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
- Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.
Those details matter because they show why “lighter” was not the final engineering target. A Trans-Am car had to withstand cornering loads, curbs, contact and technical inspection. The cage, replacement roof and other reinforcement were part of making an aggressively light shell usable on a road course. It is not sound to apply the Ramchargers’ approximately 200-pound figure to these cars, or to describe their roof problems as evidence about every 1965 drag car.
How do the two Chrysler acid-dipping programs compare?
| Program | Discipline and purpose | Body treatment | Other defining changes | Documented risks or limits |
|---|---|---|---|---|
| 1965 A/FX Dodge and Plymouth | Drag racing and match racing; improve launch performance and meet altered-wheelbase class goals | Body-in-white shells acid-dipped by a Southern California aircraft supplier, according to the Ramchargers account | Front wheels moved about 10 inches forward; rear axle about 15 inches forward; extensive race-shop conversion | Ramchargers report approximately 200 pounds removed from eleven A990 hardtops; rollover roof collapse and later paint/acid problems are reported recollections |
| 1970 Trans-Am Barracuda and Challenger | Road racing; reduce mass while meeting Trans-Am inspection and durability demands | Production-line body shells acid-dipped before race development by All American Racers | Full roll cage to restore stiffness; at least one roof replaced after damage or inspection concerns | Revs Institute reports roof holes in one shell and a roof dimple on Sam Posey’s Challenger; no universal weight figure is established here |
The table’s central distinction is discipline. The A/FX cars chased straight-line acceleration with spectacular geometry, while the Trans-Am cars needed a stiff, inspectable structure that could survive a road course. Both illustrate the same engineering bargain: less body metal can buy performance, but only if the team manages strength, safety and corrosion consequences.
Were Chrysler’s cars banned from NHRA competition?
No broad statement that “NHRA banned all Chrysler race cars” is supported by these sources. A/FX and match-racing rules changed over time, and class restrictions influenced where altered-wheelbase cars could compete. The cars’ unusual proportions, construction and factory involvement made them controversial and difficult to fit into evolving categories, but the historical record is more specific than a blanket ban.
The Tidewater Mopar Club’s account of how Mopar put the “Funny” in Funny Cars and the overview at Street Muscle place the cars within the A/FX and match-racing environment. Rules determined which modifications were legal in a given class or event; they did not erase the cars from drag-racing history.
Recommended Free Tools
Did these cars create the modern Funny Car?
They helped create the look and mythology, but the later Funny Car category became broader and technically different. Track announcers and spectators reportedly called the 1965 altered-wheelbase cars “funny-looking,” a nickname that stuck to the style. Over subsequent seasons, Funny Cars evolved into dedicated tube-frame or heavily specialized drag racers with fiberglass bodies, radically different chassis layouts and their own rules.
That evolution is why it is inaccurate to say every later Funny Car was simply an acid-dipped Chrysler. The 1965 Dodge and Plymouths were an early factory-backed chapter: recognizable production bodies, moved axles and chemically lightened shells. Their visual drama and technical ambition helped establish the culture from which the later class developed, even as the hardware changed.
Also popular on Amazon
- Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
- Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
- Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
- 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
- Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.
What does the approximately 200-pound claim actually prove?
It proves that the Ramchargers’ historical account attributes a substantial reduction to a defined group of eleven 1965 A990 hardtops after acid dipping. It does not establish a universal Chrysler result, a precise laboratory measurement, or a before-and-after specification for an individual surviving car today.
Three qualifications are essential:
- Scope: the number applies to the eleven A990 Dodge and Plymouth hardtops described by the Ramchargers, not automatically to every A/FX shell.
- Attribution: it is a team-history figure. No independent source cited here corroborates it as a universal reduction.
- Configuration: “after acid dipping” does not mean “finished race car.” Later panel changes, cage work, glass, suspension and engine installation altered the final weight.
Using the number with those limits preserves what makes it useful: a sense of how aggressive the treatment could be without turning a historical account into a specification Chrysler published for all cars.
What should a modern reader take from the acid-dipping story?
The episode is best understood as an engineering compromise rather than a secret shortcut. Chrysler’s racers exploited every permitted way to remove mass and improve weight distribution, and chemical milling could do what ordinary workshop tools could not. But a thinner shell demanded more inspection and reinforcement, not less.
It also shows how racing programs were shaped by their rules. The A/FX cars used altered wheelbases to improve drag-racing proportions; the Trans-Am effort used cages and replacement panels to make a light shell survive road-course demands. Treating both as one generic “acid car” story hides the most important facts.
Finally, the surviving accounts reward careful wording. Say that selected Chrysler race-car shells were acid-dipped. Attribute the approximately 200-pound figure to the Ramchargers. Describe roof collapse, roof holes, paint bubbling and continuing acid action as reported historical experiences. Do not imply that Chrysler dissolved complete cars, that every racer lost the same amount, or that all Funny Cars came from one identical process.
Frequently Asked Questions
Can an acid-dipped Chrysler race car still be safely driven today?
Safety depends on the individual shell’s condition, repairs and documentation, not on its name or appearance. A surviving car should be examined by a qualified race-car fabricator for thin or perforated steel, contaminated seams, cage integrity, roof structure and corrosion before any track use.
What is a body-in-white shell?
It is a bare production body structure before the drivetrain, glass, trim, wiring and most running gear are installed. Sending that shell for chemical treatment let a supplier work on the steel directly and kept unrelated components out of the bath.
Why were aircraft suppliers involved in the process?
Aircraft manufacturing had established chemical-milling experience for removing metal from large structures with controlled thickness. The Ramchargers’ account identifies a Southern California aircraft supplier, but the available sources do not identify a single standardized Chrysler supplier or process used for every car.
Did acid dipping replace fiberglass bodies in later Funny Cars?
No. Later Funny Cars developed their own specialized chassis and lightweight body technology, often using fiberglass replicas rather than thin, altered production steel shells. The 1965 Chrysler cars are an early historical link, not a blueprint for every later Funny Car.




