Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
The Audi TT 8J Roadster is the second-generation, two-seat TT convertible built from 2006 to 2014, but the specification pages commonly used for it are split into an early listing that ends in 2010 and a facelift listing covering 2010–2013. That distinction matters: an early-page result is not automatically a complete specification for every 8J Roadster.
AutoCentrum lists a 4,178 mm body length, 1,842 mm width without mirrors, 1,952 mm including mirrors, 1,358 mm height, a 2,468 mm wheelbase and 250–700 litres of luggage capacity. Engine entries range from the 160-hp 1.8 TFSI to the 340-hp 2.5 TFSI, with petrol, diesel, front-drive and quattro configurations depending on the exact year and market. Use the tables below as a guide, then confirm the individual car’s model year, engine code, gearbox and drivetrain from its documents or VIN.
As an Amazon Associate I earn from qualifying purchases.
Recommended Free Tools
What does “Audi TT 8J Roadster” cover?
“8J” identifies the second TT generation. AutoCentrum describes that generation as running from 2006 to 2014, while its Roadster technical-data pages use narrower catalogue groupings: an early page with variants listed through 2010 and a facelift page with variants listed from 2010 through 2013. The pages therefore describe the same generation but not one universal engine list.
The safest way to read the data is to treat each entry as a catalogue specification for a particular version. Registration year, production year and model year can differ, and equipment or powertrains offered in one country were not necessarily sold in every other market. The AutoCentrum 8J Roadster specification page is useful for locating a variant; the Roadster overview adds owner-submitted operating information.
Popular on Amazon
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
What are the Audi TT 8J Roadster’s main dimensions?
The headline body measurements shown by AutoCentrum are:
| Specification | AutoCentrum figure | How to use it |
|---|---|---|
| Body length | 4,178 mm | Overall vehicle length |
| Body width, mirrors excluded | 1,842 mm | Useful for a garage or parking-space check |
| Width including mirrors | 1,952 mm | Use this for the car’s maximum side-to-side footprint |
| Height | 1,358 mm | Roof-up vehicle height; verify the exact measurement convention for a particular version |
| Wheelbase | 2,468 mm | Distance between the front and rear axle centres |
| Seats | 2 | The Roadster is a two-seat convertible |
| Doors | 2 | Two-door body |
| Luggage capacity | 250 litres minimum; 700 litres maximum | Use the minimum figure for normal luggage planning and confirm the measurement standard before comparing with another model |
These figures are attributed to AutoCentrum, whose pages do not show a publication or revision year in the accessible material. Measurement conventions can vary between markets and specification databases, so a buyer who needs millimetre-level clearance should check the individual car and the measurement method rather than assuming every 8J Roadster is identical.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Which engines appear on the early 8J Roadster listing?
The early AutoCentrum grouping lists the following Roadster engine entries, with catalogue periods ending in 2010:
| Engine entry | Listed power | Fuel | Important qualification |
|---|---|---|---|
| 1.8 TFSI | 160 hp (160 KM) | Petrol | Early-page listing; exact drivetrain and gearbox depend on the variant |
| 2.0 TFSI | 200 hp (200 KM) | Petrol | Early-page listing; do not assume it represents every 2.0-litre car |
| 2.0 TFSI | 272 hp (272 KM) | Petrol | High-output catalogue entry; confirm market and transmission |
| 2.5 TFSI | 340 hp (340 KM) | Petrol | Listed as an early catalogue variant, not a guarantee of availability in every country |
| 3.2 V6 quattro | 250 hp (250 KM) | Petrol | Quattro is part of the listed name |
| 2.0 TDI quattro | 170 hp (170 KM) | Diesel | Quattro is part of the listed name |
Power figures above are catalogue values, not independent performance measurements. The page does not establish that every engine was sold with every gearbox, body colour, wheel package or emissions specification in every national market.
Also popular on Amazon
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
What changes on the facelift Roadster?
The facelift page covers variants listed from 2010 through 2013. Its engine menu is:
| Engine entry | Listed power | Fuel | Scope note |
|---|---|---|---|
| 1.8 TFSI | 160 hp (160 KM) | Petrol | Appears in both the early and facelift catalogues |
| 2.0 TFSI | 211 hp (211 KM) | Petrol | Facelift catalogue entry; different from the early 200-hp listing |
| 2.0 TFSI | 272 hp (272 KM) | Petrol | High-output entry retained in the facelift grouping |
| 2.5 TFSI | 340 hp (340 KM) | Petrol | Facelift catalogue entry; verify the market-specific car |
| 2.0 TDI | 170 hp (170 KM) | Diesel | The facelift table does not put “quattro” in this row’s name, so confirm drivetrain separately |
The appearance of a 211-hp 2.0 TFSI in the facelift list is one reason not to identify a car by displacement alone. A “2.0 TFSI” badge does not tell you which power level, transmission or drive layout the car has.
For the facelift catalogue, consult AutoCentrum’s Audi TT 8J Roadster facelift technical page. Treat the early and facelift pages as complementary, not as two promises that every listed engine was continuously available from 2006 to 2014.
How can you identify the correct specification for a particular car?
Start with the car, not the badge. A reliable identification process prevents the most common 8J specification mistakes.
Also popular on Amazon
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
- Record the model and production information. Note the registration date, production date if available, and whether the seller describes the car as pre-facelift or facelift. A registration year alone does not prove the model-year specification.
- Confirm the engine code and stated output. Compare the engine code on the vehicle documentation, service records or VIN report with the catalogue entry. “1.8 TFSI” and “2.0 TFSI” each cover more than one listing in the supplied data.
- Check drivetrain. Look for an explicit quattro designation in the exact variant record and verify the car itself. Do not infer all-wheel drive from an engine size or from a photograph of a badge.
- Identify the gearbox. The specification database may list different transmissions for different versions. Confirm the installed gearbox from the VIN build sheet, registration documents and the selector or pedal layout.
- Match emissions and mass data. These can change with engine, transmission, equipment and market. A secondary comparison table at vwGolf.pl contains variant-dependent emissions, gearbox, tyre, brake, mass and fluid information; it should not be applied wholesale to every Roadster.
- Check wheels, tyres and brakes. AutoCentrum says its comparison function can show suspension, drive, brakes and tyre dimensions. Use the exact variant page, then verify the sizes physically or against the car’s approval documents before ordering parts.
What do the body and luggage figures mean in daily use?
With two seats and 4,178 mm of length, the Roadster prioritises a compact footprint over rear-passenger capacity: there is no rear bench to trade against luggage room. The 250-litre minimum and 700-litre maximum figures are database values, so they are best used for comparing the same source’s variants rather than for assuming a particular suitcase count.
Width deserves two checks. The 1,842 mm figure excludes mirrors, while the 1,952 mm figure includes them. A garage opening, narrow gate or automated parking system should be assessed against the wider number, with additional clearance for mirror movement and door opening. Height can also vary in how a database measures a convertible, so measure a car with its roof in the position relevant to your storage situation.
Free tools Windows power users keep installed
One-click scans. No signup required.
What do the fuel-consumption figures actually show?
AutoCentrum’s overview displays owner-reported averages of 9.3–11.8 l/100 km for petrol cars and 8.7 l/100 km for LPG. Those values are shown alongside four consumption reports. They are a small, user-submitted sample, not an official laboratory cycle, a controlled road test or a prediction for every engine.
Use the figures as an indication of the spread owners have entered, not as a purchase guarantee. Consumption can change substantially with engine output, gearbox, quattro hardware, traffic, temperature, tyre pressure, roof position, driving style and maintenance. A diesel, petrol and LPG result should not be compared as if they were measured under identical conditions, and the source does not provide enough reports to calculate a model-wide average or reliability rate.
Also popular on Amazon
- 7 Colors Car Light: The led interior car lights are built-in 6 RGB LED lamp beads, which can be changed 7 different colors by touching, such as white, red, green, blue, yellow, pink purple, ice blue. The colors are bright and vivid, but not dazzling.Attention: Please charge before use.
- Touch Switch Design: Our led lights for car interior features touch control, one-key perspective lighting. Long touch to turn on/off, touch once to change the colors.
- Easy to Use: Stick the the iron plate in one place with double-sided tape, then put the light on it to complete the installation and fixation. Due to magnetic design, quickly install and remove, you also can attach the interior car lights to other metals.
- Portable & USB Rechargeable: Compact size, easy to carry, does not take up space. The wireless car led lights interior is charged by the USB cable, only need takes 40 minutes to fully charge the lights at a time, and keep lighting for about 2 hours.
- Wide Application: LED touch lights can be installed in dark places, such as storage boxes, armrest boxes, seat corners, etc. It's also suitable for bedside lights, wardrobe lights, reading lights, backpack lights, place it anywhere in the room, any dark place can be illuminated by it.
Does the specification data prove reliability?
No. The overview contains a few owner-submitted fault entries, including preventive-work advice attached to one 2.0 TFSI report, but the entries are informal and too limited to establish a defect frequency or a generation-wide reliability conclusion.
For a used-car decision, treat those notes as prompts for inspection rather than as statistics. Ask for invoices, verify whether scheduled maintenance was completed, scan the car for stored faults and have a qualified technician inspect the engine, cooling system, turbocharging hardware, transmission, roof mechanism, suspension and brakes. The specification pages can identify what the car is supposed to be; they cannot certify its present condition.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Which technical details should you compare between two 8J Roadsters?
Compare like with like. The most useful axes are:
- Generation position: early catalogue grouping versus facelift grouping, with the actual model year confirmed.
- Engine and power: displacement alone is insufficient because the listings include multiple outputs for the same displacement.
- Drive layout: front-wheel drive versus quattro, confirmed for the exact variant.
- Gearbox: identify the fitted transmission rather than assuming it from engine size or trim.
- Emissions standard: compare the recorded standard for each exact version and market.
- Mass: use the variant’s stated figure; equipment and drivetrain can change it.
- Wheels, tyres and brakes: compare approved dimensions because they affect replacement cost, clearance and handling characteristics.
The secondary vwGolf.pl table is useful for organising those fields, but it combines different 8J versions. A number copied from one row is not a universal Roadster specification.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What should you verify before buying an Audi TT 8J Roadster?
- VIN and paperwork: make sure the VIN, engine code, stated power and registration documents agree.
- Model-year scope: decide whether the car belongs to the early or facelift grouping before comparing prices or equipment.
- Drivetrain and gearbox: verify quattro status and transmission from the build information.
- Tyres and brakes: compare the installed sizes with the approved specification; mismatches may indicate modifications or incorrect replacement parts.
- Roof and seals: operate the convertible roof, check warning messages and look for dampness in the cabin and luggage area.
- Service evidence: request dated invoices and maintenance records instead of relying on a seller’s engine description.
- Consumption context: use the owner-report range only as background; ask the owner how and where the car was driven.
- Market differences: confirm that the equipment and emissions details apply to the country in which the car was first sold.
Where does AutoCentrum’s data fit in a specification search?
AutoCentrum is the primary source for the titled Roadster specification and overview in this article. Its technical page is designed to let readers inspect engine parameters and performance, suspension, drivetrain, brakes and tyre dimensions. Because the accessible pages do not state a publication year, this article does not assign one.
Also popular on Amazon
- Creative DIY Mode: Choose from 16 million available colors or customize car led light effects to your liking in DIY mode via Govee Home app. Make your car stand out in unique style with creative freedom and outdoor decorations.
- Dynamic Music Mode: Built-in mic helps interior car lights sync with any music type. Liven up your road trips, weekend getaways or evening commute with colors that dance vibrantly to your favorite songs.
- Smart App Control: Manage the colors and brightness of car lights or choose music mode by one simple tap with Govee Home app. Enjoy a comfortable and vibrant driving experience with convenient control.
- 2 Lines Design: 2 lines design connect the 4 car led strip lights, attaching the inside car lights easily to any car model without worrying about exposed wiring or an untidy look.
- Simple Installation: Before you install, make sure the installation surface is clean and dry. Then attach the led lights for car to your vehicle with adhesive and support clips. Rubber tubing outside protects lights from water spills.
The figures are most useful as a starting index: select the closest engine and year grouping, then cross-check the individual vehicle. This approach avoids treating a catalogue row as proof that every car with an 8J badge has identical dimensions, equipment, emissions, mass or drive layout.
What is the practical verdict on the TT 8J Roadster specifications?
The 8J Roadster is a two-seat, 4,178-mm-long convertible with a listed 250–700-litre luggage range and a broad engine catalogue spanning 160 to 340 hp. The critical fact is not one headline number but the split between early and facelift listings. Confirm the car’s model year, engine output, drivetrain, gearbox, emissions data and wheel or brake specification before using the figures for a purchase, repair or parts decision.
Frequently Asked Questions
Is the Audi TT 8J Roadster the same car as the first-generation TT?
No. The 8J designation refers to the second TT generation, which AutoCentrum places in the 2006–2014 period. The earlier 8N and later 8S generations require separate specification data and should not be mixed into an 8J comparison.
Did every Audi TT 8J Roadster engine come with quattro?
No. The catalogue includes both explicitly quattro-named entries and entries where the drivetrain is not stated in the engine label. Confirm the exact build record rather than inferring drive layout from displacement, trim or a badge.
Can I use the 700-litre figure as the normal boot capacity?
It is AutoCentrum’s listed maximum luggage figure, while the same data gives 250 litres as the minimum. Because databases can use different test positions and conventions, compare cars using the same source and check the roof and luggage configuration relevant to your trip.
Are the 9.3–11.8 l/100 km figures official fuel-economy ratings?
No. They are petrol owner reports displayed by AutoCentrum, alongside an 8.7 l/100 km LPG figure, with four reports shown on the overview. They are useful context but not controlled test results or a guarantee for a particular engine, gearbox or driving pattern.
Which documents are most useful when checking a used 8J Roadster’s specification?
The VIN/build record, registration document, engine-code information, service invoices and wheel or tyre approval paperwork are the most useful combination. Together they can resolve differences between catalogue listings, seller descriptions and the equipment fitted to the individual car.




