Eskom has extended its registration-charge waiver until further notice for eligible customer-owned generation systems of up to 50 kVA connected directly to Eskom’s distribution network. The waiver removes the covered charges, not the registration requirement: qualifying grid-connected systems still need to be registered.
What Eskom’s fee waiver covers
In an announcement dated 30 September 2026, Eskom said the waiver of registration-related charges would continue “until further notice.” It applies to eligible customer-owned generation systems with capacity of up to 50 kVA that are connected directly to Eskom’s distribution network. Eskom has not announced a new end date, but “until further notice” does not mean the waiver is permanent. Eskom’s announcement describes the scope and extension.
As an Amazon Associate I earn from qualifying purchases.
The waiver concerns charges associated with registration. It does not cancel or suspend the underlying duty to register a qualifying grid-connected installation.
Who must register a solar system?
NERSA’s 2 February 2026 clarification says small-scale embedded generation (SSEG) facilities below 100 kW that have a grid connection must register with the relevant distributor. The 100 kW threshold describes the registration rule in NERSA’s clarification; it is not the limit for Eskom’s fee waiver, which is stated separately in kVA. Do not treat the two thresholds as interchangeable.
#1 Best Overall
- [Wide Application]: Daily Output 800wh/day under 4 hours full sunshine condition. Perfect for RV, Caravan, Marine, Camper, Electric scooter, Golf Carts, Power wheels, Trolling motor, Tool trailer, Backup power supply for cabin shed home etc.
- [Excellent Performance]: ECO-WORTHY solar panels use high-performance monocrystalline solar cells, which can provide up to 21.5% higher efficiency sufficient light conditions.size：35.2*23.1.37in
- [Durable]: Corrosion-resistant aluminum alloy frame, so that the panel can be used for decades, and can withstand strong wind (2400Pa) and snow load (5400Pa), with a long service life. Ip65 rated junction box provides complete protection.：
- [Complete and Easy]: The back of the pre-drilled and plug-and-play cables allow quick installation, the kit can be connected in series (24V) or parallel (12V) if you need. What you will get: 2 pcs 100W mono solar panel + 2 set of Z mounting brackets + 30A solar controller + 1 pair of 16.4ft 10 awg solar cables + 1 pair of 2-in-1 connectors + 1 pair of 4.92ft tray cable.
- [Support]: 1 year with 24/7 tech support, if any problems or questions about the product,please do not hesitate to let us know through Amazon or call ECO-WORHTY hotline for solution.
The relevant distributor depends on how your property receives electricity:
| Supply arrangement | Who to contact | What the Eskom waiver means |
|---|---|---|
| Connected directly to Eskom’s distribution network; eligible system up to 50 kVA | Eskom | Registration-related charges are waived until further notice; qualifying registration is still required. |
| Supplied by a municipality | The licensed municipal redistributor serving your address | Eskom’s announcement does not establish that the municipal process or charges are covered. |
NERSA’s clarification identifies the relevant distributor as the party to register with. Municipal processes and charges are not established as uniform nationwide, so ask your municipality for its current requirements.
Rank #2
- 【Versatile Off-Grid Solar Panels Kit】Generates up to 1.1kWh daily power with 5 hours of full sunlight. All-inclusive kit includes 2x110W N-Type panels, 30A PWM controller, Y connectors, Z brackets, PV and battery cables. Compact design fits Class B camper vans, RV, Camping, marine, boats, rooftops, farms, trailers, caravans, greenhouses, cabins, sheds and more off grid Applications.
- 【N-Type 16BB Performance】Premium N-Type cells with 16 busbar structure achieve 25% high efficiency, eliminating light-induced degradation. Delivers stable output even in low-light/cloudy conditions, with sturdy construction resisting road vibrations, perfectly stable for use on RVs, trailers and other mobile off-grid scenarios.
- 【Smart Controller & Anti-Shade Design】30A PWM controller auto-senses 12V/24V systems, compatible with lithium, gel, sealed and flooded batteries. LCD monitor, dual USB ports, 3-stage charging, and built-in safeguards (reverse polarity, overcharge, etc.) plus anti-shade bypass diodes ensure stable power.
- 【Durable & Expandable Design】IP68 waterproof with corrosion-resistant aluminum frame withstands strong wind and heavy snow. N-type cells feature low temperature coefficient maintains high output in extreme heat. Flexible for 12V/24V systems, PWM supports up to 400W input, easy series or parallel expansion with included connectors.
- 【Reliable Warranty & Support】We back our products with a 10-year warranty for solar panels and a 2-year warranty for the controller. 7*24 customer service and technical support are available to resolve your installation and product concerns efficiently.
Does a grid-connected system have to register if it does not export?
Eskom says the registration question turns on whether the installation has a point of connection to the grid and on its installed capacity—not simply on whether it sends surplus electricity back to the network. A system connected to the grid may therefore fall within the registration requirement even if configured not to export. Eskom says generation with no grid connection—an off-grid installation—is exempt. Check Eskom’s explanation and NERSA’s applicable guidance for your setup.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteRegistration is not a Certificate of Compliance
A Certificate of Compliance (CoC) and distributor registration serve different purposes. Eskom describes a CoC as confirmation that electrical work complies with applicable safety requirements. Registration gives the distributor information about the location, technology and installed capacity of generation connected to the network. A CoC does not replace registration, and registration is not a substitute for electrical safety certification.
Rank #3
- High-Efficiency Monocrystalline Silicon: The 100W solar panel uses premium monocrystalline silicon cells, providing up to 30% higher efficiency than ordinary silicon, ensuring maximum power output even in low-light environments
- All-Weather Durability: Constructed with a waterproof junction box, edge-seal waterproofing, and a corrosion-resistant aluminum frame, this panel is built to withstand hail, snow, rain, and other adverse weather conditions for long-lasting performance
- Smart Solar Charge Controller: The included controller offers comprehensive protection including overcharge, over-discharge, over-voltage, and short-circuit safeguards, and is compatible with 12V batteries, with a built-in LCD display and USB ports for convenient monitoring and device charging
- Complete Installation Kit: The package comes with all necessary accessories including solar-to-controller cables, O-ring terminal power cables, Z-brackets, and screws so you can install the system quickly and easily without additional purchases
- Versatile Off-Grid Compatibility: Suitable for RVs, boats, cabins, and remote power needs, this system is compatible with a wide range of 12V battery types, making it a flexible and reliable solution for off-grid living
Eskom’s March 2026 submission list included a CoC, an inverter test certificate and an installation test report. Requirements can change, so check the current checklist on Eskom’s SSEG platform before submitting. The March announcement containing that document list is available here.
Why registration is contested
Eskom’s case for registration
Eskom says installation-specific information helps distributors plan networks, manage voltage, protect equipment, analyse faults and keep workers safe around the network. It also says registration and electrical safety certification have separate functions. These are Eskom’s stated reasons for collecting the information; they do not alter the scope of the fee waiver.
Rank #4
- 【200W N-Type 16BB High Efficiency】Built with advanced N-type monocrystalline cells and 16BB busbar technology, the Callsun 200 watt solar panel delivers up to 25.6% conversion efficiency. N-type cells provide excellent power generation and reliability, while the 16BB design helps reduce hot spots and microcrack risks for dependable long-term performance.
- 【400W Series Connection for Portable Power Stations】Pair two Callsun 200W panels in series to reach 400W total power, 47.48V Vmp and 54.62V Voc while maintaining 8.43A operating current. This configuration is well suited for many portable power stations with 60V-class solar input limits, helping maximize solar charging within supported voltage and current ranges.
- 【Boost Energy with Bifacial Technology】The Callsun 200W bifacial solar panel features a transparent backsheet that captures sunlight from both the front and rear sides. By utilizing direct, reflected and diffuse light, the bifacial design can generate additional energy from the rear side under suitable installation conditions, helping maximize overall solar output.
- 【TwinCell Anti-Shading Design】The Callsun 200W solar panel features a dual-module parallel design that divides the panel into two independently operating sections. When one section is partially shaded by trees, buildings or other obstacles, the other section can continue generating power. This design helps reduce the impact of partial shading and maintain more consistent energy production.
- 【Compact Design for RVs, Vans & Off-Grid Use】Each panel measures 51.3 × 30.3 × 1.4 inches and weighs 23.8 lbs, delivering strong power output in a compact footprint. This 200W solar panel is ideal for Class B vans, RVs, marine applications, rooftops and other space-conscious off-grid solar systems. Pre-drilled mounting holes make installation with compatible mounting hardware straightforward.
OUTA’s objection
In a statement on 1 October 2026, the Organisation Undoing Tax Abuse (OUTA) acknowledged the indefinite extension of the charge waiver but continued to question the rationale and value of compulsory household registration. That is an advocacy group’s criticism, not a court ruling or evidence that NERSA has withdrawn the registration rule. OUTA’s response sets out its position.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →The practical distinction is clear: Eskom’s latest decision addresses the cost of registering eligible Eskom-direct systems, while the disagreement over whether household registration is justified remains unresolved by the waiver itself.
Best Value
- [Wide Application] 800Wh daily output depends on the 4 hours sunlight availability. This panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, caravan, boat, Green house and more.
- [Excellent Performance] 22% High solar cell efficiency; Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa)
- [Multiple Protection] The Renogy Adventurer-Li 30A PWM charge controller is designed for aesthetically clean flush mounting on RV or camper walls; Protection against: overcharging, overload, short-circuit, and reverse polarity
- [Easy Installation] Pre-drilled holes and Plug&Play cables on the back allow for fast mounting, and it supports lithium batteries, lead-acid batteries, gel batteries; 3 pairs of Y branch connectors are newly added to meet your parallel requirements
- [VVarranty] 5 year vvarranty and 24/7 technical support team.
How to check what applies to your installation
- Confirm your electricity distributor. Check whether your property is supplied directly by Eskom or by a municipality. If a municipality supplies you, request its current SSEG registration rules and charges.
- Establish whether the system is grid-connected. If it has a point of connection to the grid, assess registration with the relevant distributor even if it does not export power. Eskom says a genuinely off-grid system with no grid connection is exempt.
- Check the applicable capacity threshold. The Eskom waiver applies to eligible systems up to 50 kVA connected directly to its network. NERSA’s February 2026 clarification addresses grid-connected SSEG facilities below 100 kW. These are distinct thresholds with different scopes.
- Use the distributor’s current process and document list. Eskom’s March 2026 list included a CoC, inverter test certificate and installation test report; verify the live checklist before applying.
In April 2025, Environment Minister Dion George welcomed an earlier Eskom fee waiver and urged that it be extended indefinitely, warning that restored charges could deter renewable investment. That was the minister’s position at the time; Eskom’s 30 September 2026 announcement subsequently extended its eligible waiver until further notice. The government statement provides that earlier context.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
