Free tools Windows power users keep installed
One-click scans. No signup required.
Infineon has extended the AURIX TC3x automotive microcontroller family with a reported 400-MHz performance class. The change raises the family’s maximum reported CPU frequency by up to one third versus earlier TC3x variants, but that clock-rate figure is not a benchmark and does not establish a matching increase in real-world application performance.
What the 400-MHz option changes
Embedded.com reports that Infineon is adding a 400-MHz performance class within the existing AURIX TC3x family, rather than announcing a separately named new generation. The article attributes the frequency information to Infineon. Infineon’s AURIX portfolio lists TC3x families including TC32xLP, TC33x, TC35xTA, TC36xDP, TC37x, TC38x, and TC39x, but does not identify which orderable variants get the new frequency option.
As an Amazon Associate I earn from qualifying purchases.
Embedded.com describes the change as up to one third higher CPU frequency than earlier TC3x variants. That is a comparison of clock frequency, not proof that a particular vehicle-control task, diagnostic routine, or communication workload will complete one third faster. The report includes no workload benchmarks, power figures, or test methodology.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What higher frequency could mean for vehicle systems
The reported rationale is additional headroom for automotive real-time processing. The workloads named include control algorithms, diagnostics, and communications; application areas include engine management, chassis control, and advanced driver-assistance systems (ADAS). These are intended use cases, not independently demonstrated results for a specific vehicle or software workload.
#1 Best Overall
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos;ESP32 is a safe, reliable, and scalable to a variety of applications
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- 1PCS 30Pin ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters
For an engineering team, the practical question is whether a higher-frequency variant can meet timing requirements with the desired margin under the actual application’s operating conditions. Clock frequency alone cannot answer questions about total system performance, power consumption, thermal behavior, or safety compliance. Those require part-specific documentation and application-level evaluation.
What may stay familiar—and what still needs checking
Embedded.com says the 400-MHz option retains the established TC3x architecture and could allow development teams to reuse hardware designs, software frameworks, and functional-safety concepts. Treat that as a continuity possibility, not a blanket compatibility guarantee. Confirm the selected MCU’s pinout, peripherals, memory, package, supported software, and safety documentation against the existing design and safety case.
Rank #2
- 【ACEBOTT ESP32 Development Board】 - Powerful WiFi and wireless development board, driven by the rugged ESP 32 module, seamlessly integrated with Arduino IDE. With Hall sensors, high-speed SDIO/SPI, UART, I2S and I2C, it is the cornerstone of IoT and smart home innovation.
- 【Wi-Fi/Bluetooth and Arduino Cloud Compatibility】 - This board uses 2.4GHz dual-mode WiFi and wireless chips with low-power technology, which are RoHS-compliant, simplifying wireless communication and allowing you to easily connect devices and platforms. Whether you are using a compatible Arduino IDE or exploring other development environments, our board can easily adapt to your needs.
- 【Improved and Professional Edition】 - All IO pins are brought out for easy development; no additional breadboard is required; the Type-C interface is equipped with electrostatic discharge protection diodes and transient voltage suppression diodes to protect the chip from damage by electrostatic breakdown and various surge pulses. In addition, it is equipped with a freeRTOS operating system, which is very suitable for the Internet of Things, smart homes, and building smart robots/game consoles.
- 【Easy to Use】- The ACEBOTT ESP-32 Development Board includes everything you need to support the microcontroller. Just connect it to a computer via a USB cable or use an AC-DC adapter or battery to power it to start using it. Whether you are an experienced developer or a hobbyist, this development board can provide you with the tools you need for unlimited innovation.
- 【 Install Plugins And Download Drivers】: This ESP32 development board includes detailed instructions on how to download plugins and all necessary programs and codes from the network environment. The path is: ACEBOTT official website - Resources - WIKI.
The report does not name exact new part numbers. Infineon’s portfolio page provides the broader family structure, but not a part-level mapping for the 400-MHz option. Before making a design decision, verify the precise device and its documentation with Infineon or an authorized distributor.
Production timing and availability
Embedded.com reported that the first 400-MHz variants were scheduled to enter production in 2026. That is a reported production schedule, not confirmation that a device is currently orderable or in stock. The report supplies no orderable part numbers or live availability information; confirm both for the target region and purchasing channel before planning around the device.
Rank #3
- Maximum performance: the Pro micro microcontroller development board runs at 5 V/16 MHz and supported by IDE V1.0.1 for smooth programming. Suitable for Arduino.
- Versatile connections: Pro micro with 4 x 10-bit ADC pins, 12 x digital I/Os and serial Rx and Tx hardware connections, you have all the ports you need.
- Easy programming: Pro micro simply connect the motherboard to the on-board micro USB port and program it. If it is not detected, just install the driver.
- Multifunctional I/O: Pro micro there are 54 digital input/output pins available, including analogue inputs/outputs, as well as interfaces such as PWM, SPI, I2C etc., which offer a wealth of hardware connection options.
- Good compatibility: the seamless integration with the Arduino IDE and the extensive development tools and libraries ensure a smooth learning curve and make it a good choice for beginners.
How to assess a specific TC3x design
- Identify the exact MCU. Confirm the full part number and whether it is one of the 400-MHz variants; the family name alone is not enough.
- Check the application constraints. Compare required real-time deadlines and processing margin using the target software and workload, rather than translating the frequency increase directly into a throughput estimate.
- Validate reuse assumptions. Review board-level, software-framework, and functional-safety compatibility for the chosen part, including any changes needed to the existing hardware or safety case.
- Confirm evaluation support and supply. Check whether a suitable evaluation kit supports the exact MCU, then verify current orderability and regional availability. The reported material does not establish kit compatibility or stock for any particular new variant.
The available information supports a family-level update, not a part-by-part buying recommendation. Choosing between TC3x devices requires the exact part number, application needs, compatibility evidence, evaluation-kit support, and current supply details.
Quick Recap
Best Value
- Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
- The module is ESP--32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
- ESP32 development board GPIO breakout board GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
- This esp32 kit is safe, reliable, and scalable to a variety of applications. Stable and highly reliable. Great contact and stable signal transmission for your program
Rank #4
- High-performance dual-core processor – ESP32S is equipped with a powerful dual-core 32-bit CPU with a main frequency of up to 240MHz, providing smooth and efficient computing power for IoT and embedded applications.
- Wi-Fi & Bluetooth dual-mode support – Integrated 2.4GHz Wi-Fi and low-power Bluetooth, supporting wireless data transmission, remote control and smart device connection.
- Rich interfaces and functions – Provides GPIO, UART, SPI, I2C and other interfaces, supports touch sensing, infrared remote control, DAC and other functions, suitable for a variety of electronic projects.
- Low-power design – With multiple power saving modes, supports deep sleep and ultra-low power operation, suitable for battery-powered Internet of Things (IoT) devices and remote monitoring systems.
- Compatible with multiple development environments – Supports for Arduino IDE, for ESP-IDF, for MicroPython and for PlatformIO, easy to develop, suitable for beginners and advanced developers to quickly build smart applications.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
