Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Reset the Toyota Tacoma maintenance light only after completing the service it represents. The procedure is different on older trucks with a physical trip-meter button, 2016–2023 models with steering-wheel controls, and 2024-and-newer Tacomas with separate scheduled-maintenance and oil-maintenance menus.
You do not need an OBD-II scanner for the Toyota-documented reset procedures. Use the section matching your Tacoma’s model year and instrument cluster.
As an Amazon Associate I earn from qualifying purchases.
Before resetting the maintenance light
The maintenance reminder is a mileage-based service reminder. It does not confirm that the oil was changed, fluids were checked, or other scheduled work was completed.
On older U.S.-market Tacomas, Toyota describes the reminder as appearing at about 4,500 miles after the previous reset and remaining on at approximately 5,000 miles. A normal maintenance reminder is not the same thing as a check-engine, oil-pressure, ABS, or brake warning.
#1 Best Overall
- 【Compatible Vehicles】The Cabin Air filter and the Engine Air Filter compatible with 2016-2023 Toyota Tacoma V6.
- 【200% Longer Life】 Compare with Standard air filter, we adopts advanced HV filter paper with higher filtering precision, to absorb 99.9% of impurities (hair,fines,dust and flocs etc.).For the service life, each engine air filters are engineered to last up to 20,000 miles, 200% longer than the standard performance, less replacement.
- 【2 Times Longer Life】Each package comes with two filters and can be used for 1-2 years.Each cabin air filters are engineered to last up to 20,000 miles, 30% longer than the standard performance of 12,000 miles.
- 【When to replaced】(1)Smell Musty, unpleasant inside your vehicle; (2)Excessive noise when A/C is running;(3)A/C is on but still hot,etc; (4)Strange engine noise; (5)Black smoke coming out of the exhaust; (6)Smell of fuel when starting the vehicle,etc.Having a good filter can protect your HVAC system well.
- 【Easy to Install】It is convenient for you to remove the panels and clips without damaging the original car. Please watch the instructional video before installation to help you install quickly and easily.
2005–2010 Tacoma: reset with the trip-meter knob
These trucks use the physical trip-meter reset knob. Toyota’s 2005 procedure requires the odometer display—not Trip A or Trip B.
- Insert the key and turn the ignition to ON. Do not start the engine.
- Press the trip-meter knob until the display shows the total odometer mileage.
- Turn the key to OFF.
- Press and hold the trip-meter reset knob.
- While continuing to hold the knob, turn the key back to ON. Do not start the engine.
- Keep holding the knob for at least five seconds.
- Release the knob after the display shows 000000 and the maintenance light turns off.
If the display does not reset to “000000,” the procedure did not complete and the light can continue flashing.
2011–2015 Tacoma: reset from Trip A
The 2011–2015 procedure looks similar, but the required display is different. You must select Trip meter A before turning the ignition off. Selecting ODO instead is a common reason the reset fails.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Rank #2
- AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement
- The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time
- AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more
- AISIN is the #1 OE manufacturer of water pumps in the world; each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability
- Kit includes OE matched components: Water Pump, Timing Belt, Tensioner, Pulleys, Gaskets, and Installation Instructions - all packed in one convenient box, ready to install
- Start the engine and press the ODO/TRIP button until Trip meter A appears.
- Turn the engine switch to LOCK or OFF.
- Press and hold the ODO/TRIP button.
- While holding the button, turn the engine switch to ON. Do not start the engine.
- Continue holding the button until the odometer displays 000000.
- Release the button and confirm that the maintenance reminder has cleared.
ODO versus Trip A: the year-specific difference
| Tacoma model years | Display required before reset | Reset control |
|---|---|---|
| 2005–2010 | Odometer | Trip-meter reset knob |
| 2011–2015 | Trip meter A | ODO/TRIP button |
Do not apply the Trip A instruction to every 2005–2015 Tacoma. Toyota’s documented procedures differ between these groups.
2016–2023 Tacoma: use the steering-wheel display
On these Tacomas, the reset is performed through the multi-information display rather than a trip-meter button.
- Turn the vehicle to ON with the engine off.
- Use the meter-control switches on the steering wheel to select the Settings display.
- Select Maintenance Reset.
- Select YES.
- Press the confirmation button.
The menu path is:
Settings → Maintenance Reset → YES
Menu wording and screen appearance can vary slightly by equipment and model year, but the 2020 Tacoma owner’s manual identifies this path as the Toyota procedure.
Rank #3
- GENUINE with Original Equipment Manufacture Parts. Complete APSG timing belt kit for 3.4L / 5VZ-FE / V6
- ★ Compatible with TUNDRA. 2000 2001 2002 2003 2004 ( V6 3.4 engines )
- ★ Compatible with TACOMA. 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 ( V6 3.4 engines )
- ★ Compatible with 4RUNNER. 1996 1997 1998 1999 2000 2001 2002 ( V6 3.4 engines )
- ★ Compatible with T100 - 1995 1996 1997 1998 ( V6 3.4 engines ) NOTE; (Genuine Cam Seals come bulk from the Dealership)
2024 and newer Tacoma: choose the correct reset
Fourth-generation Tacomas have two separate functions. Use Scheduled Maintenance for the general service reminder and Oil Maintenance after an engine-oil service. Resetting one does not necessarily reset the other.
7-inch instrument display: scheduled maintenance
- Use the meter-control switch to select the vehicle-information or settings display.
- Select Vehicle Settings.
- Select Scheduled Maintenance.
- Select Yes.
The menu path is:
Vehicle Settings → Scheduled Maintenance → Yes
12.3-inch instrument display: scheduled maintenance
- Press and hold the meter-control switch to display the cursor in the center content area.
- Select Settings.
- Select Vehicle Settings, then press and hold the confirmation button.
- Select Scheduled Maintenance.
- Select Yes.
For the 12.3-inch display, the path is:
Settings → Vehicle Settings → Scheduled Maintenance → Yes
Resetting the oil-maintenance reminder
After an oil change, select Oil Maintenance rather than only resetting scheduled maintenance.
Rank #4
- 64.3mm Oil Filter Wrench(3/8 Drive): Compatible With Toyota,Lexus,RAV4,Camry,Tundra,FJ Cruiser,Tacoma,Avalon,Highlander,Sienna.
- Oil Filters: Compatible with Select Camry,RAV4, Highlander,Sienna,Tundra,Tacoma with 2.5, 2.7, 3.5L Engines
- Pakage List: 64.3mm Oil filter wrenchx1, Oil filter x3, Oil drain plug washer x3, Oil filter housing gasket x3, Oil drain tool x3.
- Warranty: Shonee is a brand specializing in the production and management of automotive supplies. Our products undergo strict product quality monitoring before sales.Just Buy with our 1 year guarranty.
| Display | Menu path |
|---|---|
| 7-inch | Vehicle Settings → Oil Maintenance → Yes |
| 12.3-inch | Settings → Vehicle Settings → Oil Maintenance → Yes |
What the Tacoma maintenance messages mean
Most maintenance reminders are not fault codes. They tell you that a mileage-based service interval is approaching or has been reached.
| Message or indicator | Meaning |
|---|---|
| MAINT REQD | Routine maintenance reminder on older Tacomas. |
| OIL MAINTENANCE REQUIRED | Oil-service reminder on applicable models. |
| Maintenance Required Soon | Scheduled maintenance is approaching, approximately 4,500 miles after the last reset on the 2024 Tacoma. |
| Maintenance Required Visit Your Dealer | The scheduled interval has been reached, approximately 5,000 miles after the last reset on the 2024 Tacoma. |
| Oil Maintenance Required Soon or Oil Maintenance Required | The engine-oil service reminder. |
| Engine Maintenance Required Visit Your Dealer | A possible engine or engine-component malfunction, not merely a routine service reminder. |
If the maintenance light will not reset
- Check the display mode. Use ODO for the 2005–2010 procedure and Trip A for 2011–2015 trucks.
- Do not start the engine during the button sequence. The ignition should be in ON with the engine off.
- Hold the physical button long enough. On button-operated models, keep holding until “000000” appears. Releasing the knob or button early interrupts the reset.
- Select the exact menu function. On newer trucks, choose Maintenance Reset, Scheduled Maintenance, or Oil Maintenance as appropriate.
- Check for other warnings. A check-engine, oil-pressure, brake, ABS, or engine-malfunction warning requires diagnosis rather than a routine reset.
If the correct procedure still does not work, compare the steps with the owner’s manual for the exact model year and instrument cluster. A replacement instrument cluster, a failed switch, or a communication fault may require further inspection.
Recommended Free Tools
Common incorrect advice
- “The light turns off automatically after an oil change.” It does not. The reminder must be reset manually after service.
- “Every Tacoma uses Trip A.” Incorrect. The 2005 procedure calls for the odometer, while the 2011–2015 procedure calls for Trip A.
- “You need an OBD-II scanner.” Toyota’s documented procedures use the trip-meter button or steering-wheel meter controls.
- “The maintenance light is the check-engine light.” These are separate. The maintenance reminder tracks scheduled service; engine-malfunction warnings indicate a possible fault.
FAQ
Can I reset the Tacoma maintenance light without an OBD-II scanner?
Yes. Toyota’s documented procedures use the trip-meter reset control on older Tacomas and the steering-wheel meter controls or instrument-cluster menus on newer models.
Best Value
- [Vehicle Fitment]: Compatible with Toyota Tacoma 1995-1997 (RWD; Power Steering), Tacoma 1998-2000 L4 2.4L (Power Steering), Tacoma 2001-2004 L4 2.4L, Tacoma 1998-2000 V6 3.4L (Base; DLX; RWD, Power Steering), Tacoma 2001-2002 V6 3.4L (Base; DLX, S-Runner; RWD), Tacoma 2003 V6 3.4L (DLX; S-Runner; RWD), Tacoma 2004 V6 3.4L (Base; S-Runner; RWD) --- A-Premium Tacoma Suspension Kit with original dimensions for easy installation
- [Installation Position]: Front Suspension Left and Right Side
- [Professional Replacement]: This A-Premium front suspension kit is replacement for above model's suspension system, and may help you resolve those problems: clunking noise, steering wander, uneven tire wear, excessive vibration, and poor handling
- [Specification]: Package Detail: 2 x Front Lower Ball Joint, 2 x Front Upper Ball Joint, 2 x Front Inner Tie Rod End, 2 x Front Outer Tie Rod End; Reference Part Number: K90260, K90261, EV409, K90256, K90257, ES80309
- [Buy with Confidence]: Our meticulously engineered A-Premium suspension kit is backed by a one-year, unlimited-mileage warranty. we carry a wide range of automotive accessories, allowing you to hit the road with complete peace of mind
Why will my 2011–2015 Tacoma maintenance light not reset?
Make sure Trip meter A is displayed before turning the ignition off. Using the ODO display instead of Trip A is a frequent cause of a failed reset. Also keep holding the ODO/TRIP button until “000000” appears.
Should I reset Scheduled Maintenance or Oil Maintenance on a 2024 Tacoma?
Use Oil Maintenance after an oil change. Use Scheduled Maintenance for the general scheduled-service reminder. The 2024 Tacoma lists these as separate reset functions.
Is the Tacoma maintenance light the same as the check-engine light?
No. The maintenance light is normally a mileage-based service reminder. A check-engine light or a message such as “Engine Maintenance Required Visit Your Dealer” can indicate a malfunction and should be diagnosed.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The Bottom Line
Use the procedure for your Tacoma’s year and cluster: ODO plus the trip-meter knob on 2005–2010 trucks, Trip A plus the ODO/TRIP button on 2011–2015 models, Settings → Maintenance Reset on 2016–2023 trucks, and the appropriate Scheduled Maintenance or Oil Maintenance menu on 2024-and-newer Tacomas. Reset it only after the required service is complete.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
