To enjoy your MX-5 Miata’s soft top without putting unnecessary strain on it, operate it only when the car is safely parked and the roof is dry, warm enough, and out of strong wind. Clean it gently, keep its drain filter clear, and let it dry completely before folding. These instructions are for the soft-top MX-5—not the RF retractable fastback—and follow Mazda’s U.S. 2025 owner’s manual. Procedures and cautions can vary by model year and market, so check the manual for your car before applying them.
Know which roof these instructions cover
The MX-5 is sold with different roof configurations. This guide covers the fabric soft top and its latch, folding operation, cleaning, and drain filter. It does not cover the RF retractable fastback: its roof and drainage instructions differ, so do not use RF directions as a substitute for soft-top care.
As an Amazon Associate I earn from qualifying purchases.
The specific guidance below comes from Mazda’s U.S. 2025 MX-5 owner’s manual. If your car is a different year or was sold in another market, consult its owner’s manual for the correct operating sequence and maintenance details. Mazda’s instructions explain how to care for the top, but do not establish a guaranteed lifespan or compare the performance of particular cleaners.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallThat distinction matters in everyday care, not just when a repair is needed. A roof’s operation, latching, and drainage are tied to its configuration. A procedure that applies to the soft-top car should not automatically be transferred to the RF, and the reverse is also true. Check the manual that matches the car before following detailed steps such as removing a drain filter.
#1 Best Overall
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
This is a practical routine, not a product endorsement or a promise that a particular top will last a particular number of years. The manual gives owners actionable instructions—when to operate the roof, how to wash and dry it, and how often to clean the filter—but does not publish comparative cleaner testing or a lifespan figure.
When it is safe to raise or lower the top
Choose a safe, level place off the right-of-way, park, and apply the parking brake before operating the roof. Mazda cautions against raising or lowering the soft top below 5 °C (41 °F), while the top is wet, or in strong wind. These are operating cautions in the 2025 U.S. manual, not a general temperature rating for every MX-5 model year or market.
In practical terms, treat these as separate checks before you release the latch or pull the top forward. First, make sure the car is parked securely and is not in a place where passing traffic or an uneven surface makes the operation unsafe. Next, check the roof itself: it must be dry, and the temperature must not be below Mazda’s stated threshold. Finally, consider the wind. If it is strong, wait rather than trying to manage the top in conditions Mazda cautions against.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →- Keep fingers clear of the latch and other fastening mechanisms.
- Remove objects from the top and rear-window area, and make sure the roof has room to move.
- Do not fold a wet top. A wet top folded and left to dry can deteriorate, develop mold, and drip water into the passenger compartment.
The clear-area check is easy to overlook when the car is parked with something on the roof or near the rear window. Remove objects before beginning, rather than trying to move them as the top is being folded. Keep your hands away from fastening mechanisms throughout the operation; the manual’s warning applies when releasing, moving, and securing the top.
Before driving, confirm that the top is fully secured. A visible red indicator at the latch-release button means it is not locked. If the roof rattles after latching, Mazda advises having it inspected by an authorized dealer rather than assuming it is secure.
In particular, do not treat a closed-looking latch as the only test. Check the indicator and verify the top is secured before setting off. If the latch does not reach its normal closed position, or the indicator remains visible, the roof is not ready for driving. If the roof rattles after you latch it, Mazda’s recommendation is an authorized-dealer inspection, not simply accepting the noise as normal.
Lower and raise the soft top carefully
Follow the sequence in the owner’s manual for your model year. Mazda’s 2025 U.S. manual describes these steps for the soft-top configuration:
To lower the top
- Park on a level surface in a safe place off the right-of-way, apply the parking brake, and check that the top and rear-window area are clear.
- Release the latch and remove the striker from its anchor.
- Fold the top rearward, keeping your hands away from fastening mechanisms.
Before starting, confirm the top is dry and that the conditions meet Mazda’s cautions: do not operate it below 5 °C (41 °F) or in strong wind. The manual also says not to raise or lower it while wet. These checks are part of the preparation, not adjustments to make after the roof is already moving.
Once the car is parked and the area is clear, release the latch and remove the striker from its anchor. Then fold the top rearward. Keep your fingers away from the fastening points as you work. The key is to follow the prescribed sequence rather than pulling or pushing against a latch that has not been released or a striker that remains anchored.
To raise the top
- With the car parked safely and the parking brake applied, release the folded-top lock.
- Pull the top forward and seat the striker in its anchor.
- Close the latch until it clicks, then check that the top is secured before driving. A visible red indicator at the latch-release button means the top is not locked.
Again, verify the roof is dry and that the temperature and wind conditions are suitable. Release the folded-top lock, pull the top forward, and seat the striker in its anchor before closing the latch. The click is part of the sequence, but the check afterward still matters: make sure the top is secured and the red indicator is not visible.
Rank #2
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
If the latch will not close normally, do not force it; check the vehicle’s manual for the correct procedure. If the roof rattles despite being latched, Mazda’s stated advice is to have an authorized dealer inspect it.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Do not substitute force for correct engagement. A latch that will not close normally is a reason to pause and refer to the vehicle’s instructions. Likewise, if it does click but the indicator shows that the top is not locked, do not drive on the assumption that the sound means it is secure. The manual’s checks are useful both when putting the roof up and when confirming it is ready for the road.
Wash the fabric without rough treatment
Clean the top before dirt has built up heavily. Mazda’s recommended approach is simple: brush off loose dust and coarse particles, then wash gently with synthetic neutral detergent, plenty of water, and a soft brush. Use light pressure, rinse thoroughly to remove soap, and wipe away excess water before it dries on the surface. A soft brush and a neutral detergent are the relevant tool and cleaner categories; Mazda does not name an approved product or provide comparative product testing.
Start with dry brushing so dust and coarse particles are lifted away before the fabric is wet. The point is to avoid scrubbing loose grit across the surface during washing. Then use plenty of water and a soft brush, working gently rather than pressing hard. Rinse thoroughly so detergent does not remain on the top. After rinsing, wipe away excess water before it dries, and allow the fabric to dry completely before lowering or folding it.
- Brush away dust and coarse particles before adding water, so loose grit is removed rather than scrubbed across the fabric.
- Use synthetic neutral detergent, plenty of water, and a soft brush with gentle pressure.
- Rinse the top thoroughly, then wipe away excess water before it dries on the surface.
- Allow the top to dry completely before lowering or folding it.
Do not use an automatic car wash or a high-pressure wash on the soft top. Avoid directing water at the seams where the top meets the side windows or the body; Mazda warns that water may enter the cabin or trunk at these areas.
Free tools Windows power users keep installed
One-click scans. No signup required.
These cautions apply even if you are washing the rest of the car at the same time. Avoid an automatic wash rather than relying on a program that may seem gentle, and do not aim a high-pressure stream at the fabric or the places where it meets the windows and body. Mazda specifically warns that water can enter the cabin or trunk through those seam areas.
Drying is part of the wash, not an optional finishing touch. Wipe off excess water before it dries on the surface, then wait until the top is completely dry before folding. If rain or washing has left the roof wet, leave it up to dry rather than stowing it while damp. A wet top folded and left to dry can deteriorate, develop mold, and drip into the passenger compartment.
Choose cleaners and treatments cautiously
Mazda warns that alcohol, chlorine bleach, and organic solvents—including thinner, benzene, and gasoline—may discolor or stain the top. Keep car wax off the fabric. Do not assume that a product made for another vehicle surface is suitable for the soft top.
When choosing a cleaner, the manual supports a narrow, practical comparison: does it suit the top material, does it use gentle, neutral cleaning directions, and can you follow its instructions for drying before folding? Mazda does not name an approved brand, rank products, or report comparative tests. A product marketed for convertible tops may be an option to evaluate by its directions, but its label is not proof that Mazda endorses it.
The recommended basic tools are correspondingly simple: a soft brush and a synthetic neutral detergent, used with plenty of water. A soft drying towel can be useful for wiping excess water, but Mazda does not specify a towel type. Do not interpret a specialty kit, a branded label, or a claim about another vehicle surface as a manufacturer approval. Check compatibility and directions, and avoid products containing the substances Mazda lists as harmful.
Rank #3
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
If considering a leather-treatment product, note Mazda’s caution that some such products can affect the top’s gloss. If you are unsure about a product, test it on a small, inconspicuous area first. Follow the product maker’s directions: Mazda warns that too much treatment can be as damaging as too little. After treatment, let the roof dry completely before folding it. The manual does not endorse a named cleaner or treatment, so the decision-relevant checks are whether the product suits the top material, uses gentle and neutral cleaning directions where applicable, and specifies when the roof may be folded.
More product is not automatically better. Mazda’s warning about excess treatment means that even a product intended for the material should be used according to its maker’s instructions rather than applied heavily. If the label does not make clear whether the product is suitable for the top or when the roof can be folded again, do not guess; test cautiously where appropriate and allow the roof to dry completely after treatment.
Keep the drain filter clear
Leaves and other debris can block the soft-top drain filter and allow water into the vehicle. Mazda’s 2025 U.S. manual says, “Clean the drain filter at least once a year.” Treat that as the manual’s stated minimum interval, not as a guarantee against water entry or a promise about roof lifespan.
Make the annual cleaning a routine calendar item. The interval Mazda states is at least once a year; the manual does not say that annual cleaning guarantees the cabin will remain dry, or that it gives the top a particular service life. Its reason for calling out the filter is practical: leaves and debris can block it, and blockage can allow water into the vehicle.
The manual describes removing the filters, clearing debris, and reinstalling them in reverse order. This procedure is specific to the documented configuration. When reinstalling, press each filter securely into its designated position until its tab locks. Incorrect reinstallation, as well as blockage, can allow water into the vehicle. If you are unsure which filter or position applies to your car, use the manual for its model year rather than guessing.
Reinstallation matters as much as clearing debris. Follow the applicable manual’s removal and return sequence, then press each filter into its designated position until the tab locks. A filter left loose or incorrectly positioned does not meet the manual’s instruction, and Mazda warns that incorrect reinstallation can permit water entry. Because the procedure described applies to the documented configuration, do not assume every model year has identical access or steps.
Do not confuse soft-top filter instructions with the RF’s drainage directions. If you have an RF, consult its own manual section. If you have a soft-top car from another year or market and are uncertain about the filter location or fitting, check that car’s manual before removing parts or attempting to reinstall them.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesPark and store the car with moisture in mind
When practical, avoid parking in direct sunlight to help prevent deterioration of the top. If the car will be stored in a garage for a long time, provide ventilation. Before putting on a body or soft-top cover, remove excess water and dry a wet top. Never leave the top folded while wet to dry.
These are modest habits, but they help avoid conditions Mazda calls out. When you have a choice, park out of direct sun. For long-term garage storage, provide ventilation instead of leaving the car in an unventilated space. Before covering the vehicle, deal with moisture first: remove excess water and let the top dry. A cover is not a substitute for drying the fabric first.
The same rule applies after a wash or rain. Do not fold a wet roof to make it dry out of sight. A wet top folded and left to dry can deteriorate and develop mold, and water can drip into the passenger compartment. Leave the top open to dry completely before folding it, and do not put a cover over a wet top.
Rank #4
- Buyer's Guide: The seat guard for car seat between seat & console measures 15.75*2.7*1.53", suitable for gaps of 1.43-1.53" in width, please double-check carefully the distance between your seat and the center console before placing an order
- Storage and Filling in One: Differ from traditional single-function gap fillers, gap filler for car incorporates storage function, offers you the convenience of storing phones and various other items, so that you can access them at any time while driving
- Avoid Items Slipping: With the bumps and vibrations of the car, phones, keys may fall into the seat crevices, which is difficult to pick up, and distracts the driver's attention. Car gap seat filler fills gaps seamlessly to create an effective barrier
- Easy to Install: Car side seat gap filler is easy to install, simply insert it into the gap between the seat and the center console, gap seat filler for car can fit tightly without affecting the normal adjustment of the seat and the use of the seat belt
- Premium Material: Crafted from premium EVA material, our car seat side gap filler boasts a combination of wear-resistant, softness&durability. Maintenance is effortless, simply rinse and wipe to quickly clean the dust and debris in corners and crevices
Mazda’s manual does not say that avoiding direct sun or ventilating a garage will extend the top by a set number of years. Treat these as ways to reduce avoidable exposure and moisture, not as a lifespan guarantee. The useful distinction is between controlling conditions where practical and assuming that any one storage habit can prevent all wear.
Recommended Free Tools
Common mistakes to avoid
- Operating the top in unsuitable conditions: Wait if the top is wet, the temperature is below 5 °C (41 °F), or wind is strong.
- Folding before the fabric is dry: Let the roof dry completely after washing or rain; do not leave it folded while wet to dry.
- Using a high-pressure stream or automatic wash: Avoid both, and keep water away from the top-to-window and top-to-body seams.
- Using harsh or incompatible products: Keep alcohol, chlorine bleach, organic solvents, and car wax off the fabric. Be cautious with treatments and follow their directions.
- Forgetting the drain filter: Clean it at least once a year and reinstall it in the designated position until the tab locks.
- Assuming a click is the only security check: Check the red indicator and confirm the roof is secured before driving.
- Mixing up roof procedures: Use soft-top instructions for a soft-top car and the applicable RF guidance for an RF.
Each of these errors is avoidable with a pause and a short check. Before operating the roof, look at the conditions and clear the area. Before washing, choose gentle materials and avoid the seams. Before folding or covering the car, confirm that the roof is dry. Before driving, confirm the latch and indicator. Before cleaning the filter, verify the correct procedure for the vehicle.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.A simple care rhythm
- Before operation: Park safely on a level surface, apply the parking brake, check that the top is dry and clear, and observe Mazda’s temperature and wind cautions.
- After washing: Rinse away all detergent, wipe off excess water, and let the top dry completely before folding.
- At least annually: Clean the soft-top drain filter as described in the manual for your vehicle, and reinstall it securely.
- During parking or storage: Avoid direct sun when practical, ventilate a garage for long-term storage, and dry the top before applying a cover.
Following these practices helps avoid the specific problems Mazda identifies—unsafe operation, wet-fold deterioration, staining, and water entry associated with blocked drains or incorrectly installed filters. The manual does not quantify how much these steps extend a top’s life.
If you want a short checklist to keep with your routine, use four questions: Is the car parked safely and the parking brake applied? Is the top dry, with conditions above Mazda’s minimum temperature and without strong wind? Is the roof clear of objects and correctly latched before driving? Has the drain filter been cleaned at least once during the year and reinstalled securely? These checks cover the main operation, moisture, security, and drainage points in Mazda’s guidance.
Frequently asked questions
How do I clean my MX-5 soft top?
Brush off dust and coarse particles first. Then gently wash with synthetic neutral detergent, plenty of water, and a soft brush. Rinse thoroughly, wipe away excess water before it dries, and allow the top to dry completely before folding. Avoid automatic and high-pressure car washes.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Can I lower the soft top when it is wet?
No. Mazda cautions against raising or lowering the top while wet. A wet roof folded and left to dry can deteriorate, develop mold, and drip water into the passenger compartment. Let it dry completely before folding.
What is the minimum temperature for operating the soft top?
Mazda’s U.S. 2025 MX-5 owner’s manual cautions against raising or lowering the soft top below 5 °C (41 °F). Check the manual for your model year and market, since guidance can vary.
How often should I clean the drain filter?
Mazda says to clean it at least once a year. Leaves and debris can block the filter and allow water into the vehicle. Reinstall it securely in the designated position until its tab locks, following the manual for your car.
Can I use a convertible-top cleaner or treatment kit?
Mazda does not endorse a named cleaner or treatment. Check that any product suits the top material and follow its directions. For routine washing, Mazda describes synthetic neutral detergent, plenty of water, and a soft brush. Avoid alcohol, chlorine bleach, organic solvents, and car wax; use caution with treatments that could affect gloss, and let the top dry completely before folding.
Are these instructions also for the MX-5 RF?
No. This guide covers the soft-top configuration. Mazda’s RF manual section has different roof and drainage instructions, so use the manual that matches your vehicle.
Best Value
- 🔰 UPGRADED SIDE STORAGE DESIGN - Our console cover is thinner than the old one, universal for all seasons. There is an 8.66*5.12 inch storage pocket design on each left and right side, expanding the storage space, convenient and practical. Meet the storage needs of the main passenger seat, you can store your cell phone, keys, tissues, ID and some other small daily items.
- 🔰 PREMIUM MICROFIBER LEATHER MATERIAL - This car center console cover is made of quality microfiber leather material, soft and skin-friendly touch. Exquisite and fashionable diamond shaped stitching, every detail is in place. Inside the car center console cover is made of thickened memory foam, even after squeezing, it can slowly recover to its original shape.
- 🔰 RELIEVE DRIVING FATIGUE - The arm rest cover for car adopts ergonomic design, giving just the right amount of arm support, effectively dispersing elbow pressure and relieving driving fatigue. Protect your car's center console from getting dirty or scratched. Especially suitable for long time driving or long distance traveling, bringing you a new experience of relaxation and comfort!
- 🔰 NON-DESTRUCTIVE INSTALLATION - This car console cover is designed with an elastic band for a firm fit and not easy to shake. And the back side is full of protruding dots, which can effectively avoid the armrest cover from slipping and shifting. All you need to do is to open the center console cover, put the elastic band directly into the cover and then close it.
- 🔰 BUYER'S GUIDE - You will receive a car armrest storage box with the size of 12.13*7.80 inch, please measure the size of your car's armrest storage box before you buy. We have prepared five simple and beautiful colors for you, you can choose according to your own preferences. Suitable for most of the vehicles on the market, such as car, truck, SUV, RV, van, etc.
What should I do if the top rattles after I latch it?
Mazda advises having a rattling roof inspected by an authorized dealer. Before driving, confirm that the top is secured; a visible red indicator at the latch-release button means it is not locked.
Frequently Asked Questions
How do I clean my MX-5 soft top?
Brush off dust and coarse particles, then gently wash with synthetic neutral detergent, plenty of water, and a soft brush. Rinse thoroughly, wipe away excess water, and let the top dry completely before folding. Avoid automatic and high-pressure car washes.
Can I lower the soft top when it is wet?
No. Mazda cautions against operating the top while wet. A wet top folded and left to dry can deteriorate, develop mold, and drip water into the passenger compartment. Let it dry completely first.
What is the minimum temperature for operating the soft top?
Mazda’s U.S. 2025 MX-5 owner’s manual cautions against raising or lowering the top below 5 °C (41 °F). Check the manual for your model year and market.
How often should I clean the drain filter?
Mazda says to clean it at least once a year. Follow the instructions for your vehicle and reinstall each filter securely in its designated position until the tab locks.
Can I use a convertible-top cleaner or treatment kit?
Mazda does not endorse a named product. Check material compatibility and follow the product directions. For washing, Mazda recommends synthetic neutral detergent, plenty of water, and a soft brush; avoid alcohol, chlorine bleach, organic solvents, and car wax.
Are these instructions also for the MX-5 RF?
No. This guide is for the soft-top configuration. The RF has different roof and drainage instructions, so consult the manual for that vehicle.
What should I do if the top rattles after I latch it?
Mazda advises having it inspected by an authorized dealer. A visible red indicator at the latch-release button means the roof is not locked, so confirm that it is secured before driving.
The Bottom Line
Make the soft top’s routine simple: operate it only when safely parked and conditions are suitable, clean it gently, dry it completely before folding or covering, and clean the drain filter at least once a year. Check the latch and indicator before driving, and use the manual for your model year and roof configuration—especially if you own an RF.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
