HARDI is introducing AutoTerrainPro, a sensor-based boom-management system for its TWIN FORCE and DELTA FORCE sprayer booms. The system is designed to keep the boom at a more consistent working height as the sprayer crosses uneven ground. HARDI says the package uses three standard sensors, can accept two additional sensors for demanding conditions, and includes AutoFold.
A 12 October 2026 report by Trekker, written by Lucas van de Weijer, says the new development includes a sensor mounted at the sprayer’s rear axle. According to that report, the sensor detects a hole or bump and allows the boom to be corrected. HARDI’s cited product information confirms sensor-based control but does not independently specify a rear-axle mounting point, so that detail should be treated as Trekker’s report rather than as a separately confirmed HARDI specification.
As an Amazon Associate I earn from qualifying purchases.
What AutoTerrainPro does
HARDI describes AutoTerrainPro as “a new level boom management system designed to provide more controlled boom behaviour and easier adjustment.” Its sensors and control algorithms monitor boom position and help maintain the boom’s working height and relationship to field contours.
Free tools Windows power users keep installed
One-click scans. No signup required.
The broader AutoTerrain system description refers to automatic control of boom height, slant, tilt and yaw, using ultrasonic and roll sensors. In practical terms, the objective is to reduce the amount of manual correction needed when terrain changes cause the boom to move relative to the crop.
#1 Best Overall
- Never Let a Dead Battery Ruin Your Drive. The LISEN 4 in 1 Retractable Car Charger delivers reliable power for your entire journey. Compatible with standard 12V cigarette lighter sockets, it keeps phones, tablets, and devices charged during daily commutes, road trips, and long drives — the perfect practical gift for dads, truck drivers, and anyone who lives on the road.
- Daily Driver Essential: Always Ready When You Need It. Featuring two retractable cables ( USB C & Old iPhone Charging Cable ) that extend up to 31.5 inches and dual USB ports, this charger solves cable clutter while charging up to 4 devices simultaneously. Ideal for busy fathers, commuters, and families who want a tidy car and never worry about low battery again.
- Deliver full-speed PD fast charging for iPhone 18 Pro Max & iPhone 18 Pro Max & iPhone 18 Pro right inside your car. The built-in 45W PD USB-C port hits the peak charging speed for these latest iPhone models, juicing up your phone to 50% power in just 15 minutes while you drive.(Note: Maximum 45W PD output is available under 24V vehicle power supply. When used with standard 12V car sockets, the peak output is limited to 36W.)
- Standard 12V Power Solution: Designed as a dedicated USB power supply for charging devices. Note: Does NOT support CarPlay, Bluetooth, or data transfer. Compatible with most phones, tablets, and small electronics. This retractable charger is a core car organization tool, keeping your vehicle tidy. Not compatible with Micro-USB devices.
- Clutter-Free Tech Organization: Featuring dual USB ports and retractable cables, the LISEN 4 in 1 charger provides a clean car storage solution. Perfect for truck enthusiasts or as a thoughtful gift for drivers, it supports fast USB-C charging for devices like the iPhone 18Pro & iPhone 18 ProMax. Keep your vehicle organized while ensuring efficient power delivery for all your tech on the road.
What is new in this announcement
Terrain detection linked to boom correction
Trekker reports that a sensor at the sprayer’s rear axle detects terrain changes such as holes and bumps. The reported function is to identify the chassis movement early enough for the boom-control system to correct its position. HARDI’s product page confirms the use of sensors and control software, but does not confirm that the sensor is located on the rear axle.
Claimed spray-pattern benefit
Trekker attributes a statement about a more consistent spray pattern to importer Homburg Holland. That is an attributed industry claim, not a published independent measurement. The available material does not provide a quantified improvement, a test protocol or a comparison with a conventional boom-control setup.
Rank #2
- High Quality Material: The coaster is made of environmentally friendly silicone, safe, non-toxic and odorless. Soft with toughness, easily embedded in the cup holder. Very durable, wear-resistant, long service life. High temperature resistance, can withstand 100 ℃ high temperature water cups.
- Wide Compatibility: The coaster has a diameter of 3.15 inches and a height of 1.18 inches, which is widely used in most vehicles, such as SUV, sedan, MPV, etc., as long as the size fits your car cup holder.
- Protection Function: Our car cup holder coaster has a carry handle design and a stand-up ring edge on its edge to effectively prevent food crumbs, drinks and water from leaking out and preventing the car cup holder from getting dirty.Meanwhile,Thickened design effectively prevents the cup holder from being scratched by the cup when driving on bumpy roads and eliminates the annoying thumping sound, making your journey more enjoyable.
- Easy to Use and Clean: With embedded installation, you just need to put it flat on the car cupholder. It is also very quick to remove, there is a small bump on the coaster, pinch it and you can easily remove the coaster. It is very easy to clean, rinse with water or wipe with a wet towel (be careful not to clean with sharp tools).
- 100% Satisfaction: Our products have quality assurance, if you have questions or are not satisfied after receiving the product, don't worry, please contact us as soon as possible, we provide after-sales service.
Compatible booms and sprayers
| Equipment | Compatibility stated by HARDI | What buyers should verify |
|---|---|---|
| TWIN FORCE | Listed as compatible with AutoTerrainPro | Exact sprayer model, existing hydraulic and electronic equipment, and sensor configuration |
| DELTA FORCE | Listed as compatible with AutoTerrainPro | Sprayer pairing and installation requirements |
| DELTA FORCE on AEON and NAVIGATOR | These sprayer names are specifically identified by HARDI | Whether the intended machine configuration supports the required option in the buyer’s market |
Compatibility should not be read as universal retrofit approval. HARDI advises customers to contact a local dealer about setup and sensor configuration. A dealer can establish whether a particular boom, sprayer, controller and hydraulic arrangement can use the system and which sensors are appropriate for the operating conditions.
Sensor configuration
Standard equipment
HARDI lists three sensors as standard for AutoTerrainPro. The system also includes AutoFold, HARDI’s automatic boom-folding function.
Rank #3
- ✅【Designed for Magsafe】 - The most fashionable iphone car mount in 2026 Magsafe is designed for iPhone 18 Pro Max/17/16/15/14/13/12 Pro Max Mini and official Magsafe cases and other magnetic phone cases and can be fixed directly to these phones without the need to affix metal plates. All Android Phones Will Work: Metal rings are provided; they fit cases and other phones without magsafe. Based on Unique Grandmaster Design (Protected by US Design Patent No. US D1,112,194 S)
- ✅【STRONG MAGNETIC MagSafe Car Mount】 - This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction. it easily and securely holds your phone through bumps, sharp turns or even sudden stops, no worrying of dropping your phone.
- ✅【SUPER STICK FORCE】 - VHB Dash Mounted Holders adhesive provides strong stick force between the dashboard and the car phone holder, which can firmly stick to any plane in the car, fix your device, adapt to a variety of road conditions such as sudden braking, speed bump, and rugged mountain road.
- ✅【SAFE DRIVING VIEW】 - Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving. Cell Phone Car Mount is suitable for most cars, pickups, SUV, taxi; It is the best assistant for Uber and Lyft drivers
- ✅【360° FREE ROTATION】 - With an adjustable swivel ball joint, you can rotate your smartphone or device at your own will, providing the best viewing angle. Quickly pick and place with one hand, free your hands and make calls and GPS navigation more convenient
Optional sensors for difficult fields
Two additional sensors can be added where field conditions are especially demanding. HARDI does not publish a universal rule for when the extra sensors are required, so the decision depends on factors such as terrain variation, working width, operating speed and the machine’s configuration. This is a dealer-led setup decision rather than an option that should be assumed to fit every machine.
Why boom stabilisation matters
A field sprayer’s boom must stay near its intended height while moving over changing ground. Excessive vertical movement can alter the distance between nozzles and the crop, while roll, slant or yaw can create uneven boom-to-crop spacing across the working width. Automatic correction is intended to keep the boom aligned with the field surface and reduce the operator’s need to make continuous manual adjustments.
Rank #4
- Buyer's Guide: The seat guard for car seat between seat & console measures 15.75*2.7*1.53", suitable for gaps of 1.43-1.53" in width, please double-check carefully the distance between your seat and the center console before placing an order
- Storage and Filling in One: Differ from traditional single-function gap fillers, gap filler for car incorporates storage function, offers you the convenience of storing phones and various other items, so that you can access them at any time while driving
- Avoid Items Slipping: With the bumps and vibrations of the car, phones, keys may fall into the seat crevices, which is difficult to pick up, and distracts the driver's attention. Car gap seat filler fills gaps seamlessly to create an effective barrier
- Easy to Install: Car side seat gap filler is easy to install, simply insert it into the gap between the seat and the center console, gap seat filler for car can fit tightly without affecting the normal adjustment of the seat and the use of the seat belt
- Premium Material: Crafted from premium EVA material, our car seat side gap filler boasts a combination of wear-resistant, softness&durability. Maintenance is effortless, simply rinse and wipe to quickly clean the dust and debris in corners and crevices
HARDI presents the potential benefits as improved stability, spray accuracy, reduced wear, lower drift risk and greater operator comfort. Those are manufacturer descriptions. The available announcement and product information do not establish an independently measured result for AutoTerrainPro or for the reported rear-axle sensor.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →What the announcement does not establish
- No price is stated for AutoTerrainPro, the optional sensors or installation.
- No independent quantified field trial is identified for the new sensor arrangement.
- No head-to-head performance ranking against other boom-stabilisation systems is available from the cited material.
- No blanket statement confirms that every existing TWIN FORCE or DELTA FORCE installation can be upgraded.
These limits matter when calculating the value of the system. A buyer should request an equipment-specific quotation and ask what installation, calibration, software or hydraulic changes are included.
Best Value
- 🔰 UPGRADED SIDE STORAGE DESIGN - Our console cover is thinner than the old one, universal for all seasons. There is an 8.66*5.12 inch storage pocket design on each left and right side, expanding the storage space, convenient and practical. Meet the storage needs of the main passenger seat, you can store your cell phone, keys, tissues, ID and some other small daily items.
- 🔰 PREMIUM MICROFIBER LEATHER MATERIAL - This car center console cover is made of quality microfiber leather material, soft and skin-friendly touch. Exquisite and fashionable diamond shaped stitching, every detail is in place. Inside the car center console cover is made of thickened memory foam, even after squeezing, it can slowly recover to its original shape.
- 🔰 RELIEVE DRIVING FATIGUE - The arm rest cover for car adopts ergonomic design, giving just the right amount of arm support, effectively dispersing elbow pressure and relieving driving fatigue. Protect your car's center console from getting dirty or scratched. Especially suitable for long time driving or long distance traveling, bringing you a new experience of relaxation and comfort!
- 🔰 NON-DESTRUCTIVE INSTALLATION - This car console cover is designed with an elastic band for a firm fit and not easy to shake. And the back side is full of protruding dots, which can effectively avoid the armrest cover from slipping and shifting. All you need to do is to open the center console cover, put the elastic band directly into the cover and then close it.
- 🔰 BUYER'S GUIDE - You will receive a car armrest storage box with the size of 12.13*7.80 inch, please measure the size of your car's armrest storage box before you buy. We have prepared five simple and beautiful colors for you, you can choose according to your own preferences. Suitable for most of the vehicles on the market, such as car, truck, SUV, RV, van, etc.
Questions to ask a dealer
- Is AutoTerrainPro approved for the exact sprayer serial number, boom width and controller fitted to the machine?
- Which three sensors are included, and what conditions justify adding the two optional sensors?
- Does the proposed installation use the rear-axle sensing arrangement described by Trekker, or a different approved layout?
- Are AutoFold and all existing boom-folding functions retained after installation?
- What calibration procedure is required, and who performs it?
- What are the installed price, lead time, maintenance requirements and warranty terms in the buyer’s region?
Bottom line for prospective buyers
AutoTerrainPro is HARDI’s latest boom-management offering for TWIN FORCE and DELTA FORCE equipment, with three standard sensors, provision for two additional sensors and AutoFold included. Trekker reports a rear-axle sensor that detects bumps and holes, but HARDI’s cited information does not independently confirm that mounting detail. The system’s practical suitability depends on the specific sprayer and field conditions, so an authorised HARDI dealer should confirm compatibility, configuration and installed cost before purchase.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
