Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesThe right motorcycle GPS mount is a compatible system, not just a bracket: check the cradle for your exact GPS, the motorcycle-side attachment kit, and the fit around your cockpit before ordering. Garmin and RAM offer different device and attachment options, but the available product information does not establish one universally safest or most durable mount.
What makes up a motorcycle GPS mount?
A mounting setup can include a GPS cradle or device-specific bracket, a motorcycle-side base or kit, an arm, fasteners and—if the GPS is powered on the bike—a cable and wiring. A product listing may include only some of these parts. Check the package contents and identify any separately required hardware before you buy.
Compatibility is specific to the GPS generation and the mount. Garmin says its Moto Mount Bracket, part 010-13879-02, is for the zūmo XT3; it attaches to motorcycle handlebars using a separate mounting kit. Garmin’s zūmo XT-series accessory information lists options for XT, XT2 and XT3. If you are replacing a GPS, do not assume the old device cradle will fit the new one: Garmin notes that some RAM mounting kits can remain in use while zūmo device series require different motorcycle mounts, and that some older motorcycle mounts have been discontinued. Verify the part number for your GPS and bike before ordering.
Compare attachment points and device fit
The examples below are manufacturer-listed offerings, not a tested ranking. They illustrate why the GPS model, bike-side attachment and included parts all matter.
Free tools Windows power users keep installed
One-click scans. No signup required.
#1 Best Overall
- 【 Compatibility】 NEW Rail Base with a 4-hole AMPS adaptor for the Garmin Zumo XT motorcycle GPS SatNav Dock.
- 【Features】 Small version designed to quickly install to round rails FITS HANDLEBAR SIZES:22.2mm (⅞”), 25.4mm (1”), 28.6mm (1-⅛”), 32mm (1-¼”) (diameter); rubber pads provide stable gripping and protection of mounting surface.
- 【Durability And Reliability】 Marine Grade Stainless Steel Components & High Strength Composite. Nylon construction with corrosion resistant stainless steel hardware. Rubber pads provide stable and even gripping and protection of mounting surface.
- 【Optimal Viewing】The Double Socket Arms have a full range of motion with a 360-degree rotation capability in the horizontal direction and a 180-degree rotation capability in the vertical direction. Additionally, the ball heads located at each end provide both 180-degree and 360-degree movement options, enhancing the flexibility of angle adjustments.
- 【 What's in the Box】 TUSITA Small Rail Base with 1"Ball x1;TUSITA Double Socket Arm 1" - B Size Short x1;TUSITA Ball Adapter with AMPS Plate - B Size x1
| Option | GPS compatibility stated by manufacturer | Bike-side attachment or fit | Parts and qualifications |
|---|---|---|---|
| Garmin Moto Mount Bracket, 010-13879-02 | zūmo XT3 | Handlebar attachment | Garmin says a separate mounting kit is needed. The product page listed a price of $19.99 and shipping availability of 1–3 business days when observed; both may change. Garmin product page. |
| Garmin XT-series mounting accessories | Options vary across zūmo XT, XT2 and XT3 | Handlebar, motorcycle post, or other mount options as listed for the generation | Garmin says the Handlebar Mount Kit comes with the 6-inch XT3 and works with either XT3 size; the Motorcycle Post-mount comes with the 4.7-inch XT3 and also works with either size. Confirm exact included items and fit on Garmin’s accessory page. |
| RAM-B-178U-A reservoir/handlebar mount | Garmin zūmo 400–660 | Combination handlebar and brake/clutch reservoir mount | RAM’s listing identifies legacy zūmo models; it does not establish compatibility with current zūmo generations. RAM product page. |
| RAM-B-149Z-GA6U handlebar mount | Garmin GPSMAP 72 and 76S | Handlebars, tubing or railing | RAM says the design dampens shock and vibration to help extend device life; that is a manufacturer claim, not an independent comparative test. RAM product page. |
Handlebar, clamp and post locations
Garmin’s mounting materials describe handlebar installation as well as clutch-clamp or brake-clamp brackets for the referenced zūmo 3×0 setup. Garmin’s XT3 accessory options also include a motorcycle post-mount. RAM’s cited legacy products show handlebar and brake/clutch reservoir approaches. Which location works depends on the bike’s cockpit, the mount’s fitment and the room available for the GPS and cables.
Viewing angle and cockpit clearance
Before final tightening, check that you can see and reach the screen from your normal riding position without blocking essential instruments or controls. Turn the handlebars through their full range and check that the GPS, mount and cable do not foul the tank, fairing or other motorcycle parts. Garmin’s zūmo 590 instructions specifically warn that sustained contact between the base plate or mount and the motorcycle can damage that mount over time; those instructions call for spacers and no contact. Apply that instruction to the cited zūmo 590 assembly, and consult the manual for your own model.
Rank #2
- Brand New in sealed packaging and one Year Manufacture Direct Replacement Warranty
- Heavy Duty Clamp Mount fits all Bike Handle Bar up to 1.75" inch
- Ball Connect and Socket Joint allows 360 degrees viewing angle
- easy tool less install in less than a min
How to choose a mount that fits your setup
- Identify the exact GPS. Record its model and generation, including XT, XT2 or XT3 where applicable. Search the manufacturer’s compatibility listing for that specific device rather than relying on a broad “Garmin” or “zūmo” label.
- Choose an attachment point that fits the bike. Check the handlebar diameter and available space, or confirm that a clamp, reservoir or post mount is expressly compatible with your motorcycle and cockpit. The cited product listings do not establish universal bike fit.
- Inventory the included hardware. Determine whether the listing supplies the GPS cradle or bracket, bike-side base or kit, arm, fasteners and any required spacers. For Garmin’s XT3 Moto Mount Bracket, a separate mounting kit is required for handlebar attachment.
- Decide whether the GPS will be powered from the motorcycle. A powered cradle may require a motorcycle power cable and electrical installation. Check the exact manual for cable routing and connection requirements before choosing a location.
- Check adjustability and clearance in place. Position the device for a usable viewing angle, then verify full steering movement and clearance from the motorcycle. Follow any spacers or no-contact instructions in the model-specific manual.
- Install using the instructions for that mount. Use only its specified fasteners, sequence and torque. Do not carry over torque values from a different Garmin mount or GPS generation.
Installation and electrical safety
Garmin’s zūmo installation instructions say to select a suitable, secure mounting location with power availability and safe cable routing in mind. For the specific U-bolt hardware in the referenced zūmo 3×0 guide, Garmin gives a recommended torque of 50 lbf-in and a maximum of 80 lbf-in. These figures apply to that setup only; use the instructions supplied for your exact mount and GPS.
For powered installations, Garmin warns that incorrect wiring can damage the motorcycle or battery and cause bodily injury. Its instructions state: “Garmin® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device.” The guidance is from the referenced zūmo installation instructions; consult the manual for the device and mount being installed.
Rank #3
- [Handlebar Clamp Bar] Due to the increasing number and weight of accessories mounted around the handlebar, the mount supporting the clamp bar has been changed to a two-pillar structure, and the thickness has been increased from 0.08 inches (2 mm) to 0.16 inches (4 mm), significantly improving strength.
- [Use] If there is limited space for mounts on the handlebar, installing a Clamp Bar allows you to add more accessories. It can also be used if you want to raise the position of the accessories or bring them closer.
- [Compatible Handles] Suitable for handle diameters of 0.87 / 1.0 / 1.13 / 1.26 inches (22 / 25.4 / 28.6 / 32 mm). The addition of a 1.13” (28.6 mm) rubber attachment allows installation around the handle post, even on tapered handles. The clamp bar diameter is a standard 0.87 inches (22 mm), compatible with various mounting accessories.
- [Product Details] ■Bar length: 4.1 inches (103 mm), Bar Diameter: 0.87 inches (22 mm), Clamp Diameter: 0.87 / 1.0 / 1.13 / 1.26 inches (22 / 25.4 / 28.6 / 32 mm), Mount Width: 0.6 inches (15 mm), Overall Length: 4.2 inches (106 mm), Extension Length Between Axles: 2.8 inches (70 mm) ■Weight: 2,08 oz (80g) ■Material: Aluminum alloy. ■Contents: Bar, 2 Mounts, Rubber Attachments 0.87 / 1.0 / 1.13 / 1.26 inches (22 / 25.4 / 28.6 / 32 mm), Mounting Tool
- [Manufacturer's warranty] Warranty Period: 1 year from the date of purchase. Kaedear offers continued support after purchase. For product or installation questions, our certified team is ready to assist. If a malfunction occurs, we will assess and provide free repairs or exchanges under the warranty. For business use, the warranty period is 6 months. Please refer to our website for more details. As a Japanese manufacturer, customer satisfaction is our priority, so feel free to reach out with any inquiries.
Is there one best or safest motorcycle GPS mount?
The available manufacturer listings establish product compatibility claims and installation considerations, but they do not provide a controlled comparison across motorcycles, vibration profiles, mounting locations or riding conditions. That evidence cannot support a universal safest, most durable or best-performing choice. The practical choice is the mount whose device compatibility, motorcycle attachment, included hardware, adjustment and installation instructions match your specific setup.
Quick Recap
Best Value
- Unique design：Handlebar clamp mount U-bolt base is used for motorcycle phone holder and bike phone mount, usually consisting of two semi-circular clamps that clamp the handlebar and secure to frame, with it's sturdy construction and reliable grip, can be sure that your handlebar extensions will not loosen or rotate, butterfly knob can easily adjust the tightness of the phone holder, no need for specialized tools, anyone can easily install.
- Compatible with RAM mount：This 1 inch ball handlebar clamp mount compatible with RAM Mounts & FANAUE any B size double socket arm 1 inch ball, work for other devices with 1 inch swivel ball mounting pattern, perfectly suited for mounting on yoke of an aircraft, handlebars of strollers/mountain bikes/dirt bike/trek bikes/road bike/golf carts/electric scooters/ATV or even on kayak rails and roll bars, is ideal mounting base for smartphone, tablets, action cameras, rod holders and much more.
- Easy to install：Single socket arm with handlebar base mount strong rod clamp inner non-slip rubber pad design makes it safer and more reliable when installed on the handlebar and will not damage the car paint, simply clamp the base to handlebars to secure phone holder, rod clamp Minimum clamping range of 0.87"（22mm）, maximum clamping range of 1.26"（32mm）, can clamp equipment within the range, such as motorcycle handlebars, bicycle handlebars, and other sticks, squares etc.
- Long service life：single socket arm with handlebar clamp mount U-bolt base body is made of 6061-T6 aluminum alloy, which can maintain durability and reliability in most demanding environments, surface is treated with grade III hard anodizing, solid stainless steel ball is covered with high-quality non-slip rubber, which plays a good role in protecting ball, it’s a good choice for long-term use of motorcycle phone holder, bike phone mount, handlebar phone mounts and so on.
- Lifetime Warranty：The single socket arm with handlebar clamp mount U-bolt base with a lifetime warranty, if you have any questions about the product, please contact us in time, we will provide you with the best solution within 24H. Whether you're riding beginner or riding enthusiast, this handlebar clamp mount U-bolt base can fulfill your need to free your hands. Delicate and simple design makes it can be Christmas gift for your friends, bring them surprise and fun on riding!
Rank #4
- ★ Utilizing AMPS hole pattern, the standard industrial hole configuration consisting of 4 holes aligned in a rectangular pattern with spacing of 1.181" x 1.496" (approx. 30mm x 38mm)
- ★ Compatible with Garmin units and most of phone holders, including Garmin’s Zumo XT and QuadLock Holder.
- ★ Allow you to install horizontally and vertically.
- ★ Specially designed for 12MM bar, perfectly fit Yamaha Tenere 700 or other models with the bar of the same size.
- ★ CNC machined from 6061-T6 billet aluminum, super lightweight and durable.Black anodized surface for a low-profile elegant look, taking your GPS holder up a notch.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
