The 2015 Husqvarna TE 250 is a 250 cc two-stroke enduro motorcycle. Its owner’s manual covers EU, AU and US versions, whose specifications are not identical; identify your bike’s market variant before using a spec, setup recommendation or parts listing.
Identify the correct 2015 TE 250
Husqvarna’s 2015 owner’s manual covers the TE 250 in EU, AU and US versions. The figures below come from that manual, published in 2014 for model year 2015. Husqvarna says specifications are non-binding and may be adapted to local conditions or changed during development. The manual notes that it contained the latest information for the model series when printed, while allowing for minor design differences.
Use the manual that applies to the motorcycle’s market and equipment. A model-year match alone does not establish that every specification or replacement part is interchangeable.
2015 Husqvarna TE 250 specifications
| Item | 2015 TE 250 specification |
|---|---|
| Engine type and displacement | Two-stroke, 250 cc |
| Fuel tank | Approximately 11 L (2.9 US gal), including approximately 2 L reserve |
| Gear oil capacity | 0.80 L (0.85 US qt) for TE 250/300 |
| Coolant capacity | 1.2 L (1.3 US qt) for TE 250/300 |
| Seat height, unloaded | 960 mm (37.8 in) |
| Ground clearance, unloaded | 355 mm (13.98 in) |
| Wheelbase | 1,482 ± 10 mm for TE 250/300 |
| Weight without fuel | 106.4 kg (234.6 lb) EU/AU; 104.4 kg (230.2 lb) US |
| Front suspension | WP Suspension 4860 4CS inverted forks; 300 mm travel |
| Rear suspension | WP 5018 BAVP DCC shock absorber; 330 mm travel |
These are manual specifications, not measurements of a particular used motorcycle. Suspension spring and fork adjustment recommendations depend on rider weight; consult the applicable manual rather than treating one setting as universal.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match#1 Best Overall
- Left frame part number: For 25103002210C1, Right frame part number: For 25103002220C1
- Fitment: Compatible with Husqvarna 150 250 300 350 450 501 TE FE 2020-2023
- When to Replace: Deformation or breakage due to a crash, Damage to the rear fender mounting point, Deformed seat clamp, Severe surface wear on the subframe
- Risks of not replacing: Rear wheel misalignment, Deformation of the subframe affects the alignment of the rear wheel with the frame, leading to abnormal handling
- Professional installation recommended: As this involves the rear shock absorber and suspension system, it is recommended that a professional technician perform the installation
Fuel and two-stroke oil mix
The 2015 manual specifies 95-octane super unleaded gasoline mixed with two-stroke engine oil at a ratio of 1:60. Follow the manual for the exact motorcycle and operating context when selecting fuel or preparing the mix. Do not substitute a ratio based on another year or model.
Use the manual for operation and maintenance
The owner’s manual is the controlling reference for operating and servicing this motorcycle. It covers controls, operation, service intervals, troubleshooting, technical specifications and setup. Use it for procedures and other service details—including tire pressure—that are not established by the specification summary above.
Rank #2
- Specs: Crank Shaft Seal Kit, Double lip seals with PTFE contact area tolerate dry start conditions with less crankshaft pin wear
- Meets or Exceeds OEM Specs for Fit and Performance
- Compatible With/Replacement For: Husaberg TE250 2011-2014, TE300 2011-2014, Husqvarna TC 250 2014-2019, TE 250 2014-2018, TE 250 TPI 2018-2019, TE 300 2014-2018, TE 300 TPI 2019, TX 300 2017-2019, KTM EGS 250 1997-1999, EXC 250 1997-2005, EXC 300 1997-2005, EXC 380 1998-2002, FREERIDE 250 R 2015-2017, MXC 250 1998-2001, MXC 300 1997-2005, MXC 380 1998-2001, SX 250 1997-2019, SX 380 1998-2002, SXS 250 2001-2004, XC 250 2006-2018, XC 300 2006-2018, XC-W 250 2006-2018, XC-W 250 TPI 2018-2019
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.
- 100% New aftermarket Crank Shaft Seal Kit built to meet OEM specifications
Husqvarna Motorcycles GmbH’s 2015 manual states that it contained the latest information for the model series at the time of printing, but also says minor design differences could not be ruled out. Confirm the market variant and the bike’s actual equipment before applying a setting or ordering a component.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Find and verify parts
Husqvarna’s model-specific parts catalogue identifies assemblies and diagrams for the 2015 TE 250, including the air filter, engine guard, plastics, carburetor, cylinder and head, crankshaft and piston, and electrical components. It lists the 2015 owner’s manual under part number 3402022EN and an on-board tool kit under 80329899000. A catalogue listing confirms model relevance, not current stock, condition or interchangeability.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Rank #3
- Part Name:Air Filter
- Part Number:154116
- Compatible with Husqvarna FE350 FE450 FE501 2017-2023; TC125 FC250 FC350 FS450 2016-2022; TE150i FE350S FE501S 2020-2023; FE250 TC250 FX350 FX450 2017-2022;TE250i TE300i 2018-2022; FC450 2016-2020
- Compatible with Gas Gas MC125 EC250 EC250F EX250F MC250F EC300 EX300 EC350F EX350F EX450F MC450F 2021-2023; EX250 MC250 MC350F 2022-2023
- Compatible with KT/M 125 150 250 SX 250 350 450 SX-F 250 350 450 XC-F 2016-2022; 250 350 450 500 EXC-F 250 350 450 500 EXC-F Six Days 2017-2023; 250 300 EXC TPI 250 300 EXC Six Days TPI 2018-2022
- Confirm the motorcycle’s model year and whether it is the EU, AU or US version.
- Locate the relevant assembly diagram in the 2015 Husqvarna TE 250 parts catalogue.
- Compare the diagram and part number with the motorcycle and the component being replaced.
- Check that the seller’s listing matches the verified part number before purchase.
For consumables and service parts, use the applicable manual and catalogue rather than assuming a part listed for another TE 250 market or year will fit.
Quick Recap
Best Value
- Folding Shift Lever
- Black/blue
- TC 250 2017-2022
Rank #4
- High-performance 12 V fan kit with digital display and adjustable temperature trigger for universal mounting.
- Fan moves approximately 130 CFM of airflow while drawing only ~15 watts, promoting efficient cooling.
- Pre-set to activate at ~190 °F (but adjustable to meet preference or application needs).
- Strong, powder-coated aluminum cage that mounts the fan to your radiator.
- Comes with everything needed for mounting.
Sources
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
