Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
The 2007 Harley-Davidson Softail Deuce is identified in Harley-Davidson’s model-year parts catalog as the FXSTD. Its catalog and owner’s manual are useful starting points for confirming specifications and locating parts, but a broad “Softail” label is not enough to establish replacement-part fitment. Check the exact part number and the motorcycle’s full 17-digit VIN before ordering.
How to identify the 2007 FXSTD Deuce
Harley-Davidson’s 2007 parts catalog identifies model code “JB” as the FXSTD Deuce. In the catalog’s VIN breakdown, engine code 5 denotes a 1584 cc, fuel-injected, balanced engine. Use the model-year catalog to orient your search, then verify the particular motorcycle through its complete VIN; a family name alone does not confirm a bike’s exact configuration.
2007 Harley-Davidson FXSTD specifications
The 2007 owner’s manual groups the FXSTD with the FXST, FXSTB and FXSTC models in its dimensions table. It gives these measurements for the FXSTD:
| Measurement | 2007 FXSTD specification |
|---|---|
| Wheelbase | 66.6 in (1691.6 mm) |
| Overall length | 95.4 in (2423.2 mm) |
| Overall width | 35.9 in (911.9 mm) |
| Ground clearance | 4.8 in (122.0 mm) |
| Overall height | 46.0 in (1168.0 mm) |
| Saddle height | 26.0 in (660.4 mm), measured with a 180 lb (81.6 kg) rider on the seat |
These figures come from the 2007 owner’s manual; the saddle-height measurement is rider-loaded, not an unloaded seat-height figure.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Sale
VEVOR Hydraulic Motorcycle Lift Table, 350 lbs Capacity Motorcycle Scissor Jack Lift with Wide Deck, J-Hooks, 4 Wheels, Hydraulic Foot-Operated Jack Stand for ATV Dirt Bikes
- 350 LBS Load Capacity: Just press the foot pedal for easy lifting. This hydraulic motorcycle jack securely holds up to 350 lbs/0.2 tons and is equipped with a high-strength worm gear transmission and heavy-duty solid steel scissor structure. Lift your off-road motorcycle quickly and with minimal resistance. No more bending over!
- 36" Max. Lifting Height: Our motorcycle lift has a range of 13.8"-36"/350-905 mm, making it easy to lift any off-road motorcycle. Please pay attention to the lifting range before get it!
- Movable and Lockable: With 2 pcs 360° swivel casters and 2 pcs lockable casters, our hydraulic motorcycle jack glides effortlessly beneath your bike for effortless mobility. Once it's in place, you can lock the casters in position with the brakes, providing extra stability for your maintenance needs.
- Stable Structure: Our motorcycle lift jack comes with a safety pin that secures it at the desired height, to ensure maximum safety while lifting your motorcycle. Additionally, the motorcycle lift jack is equipped with a J-hook that provides extra stability, preventing any shaking or overturning during maintenance. This ensures your vehicle remains secure and prevents any potential damage.
- 16.3" x 13.8" Wide Platform: Our hydraulic motorcycle lift table has a wide 16.3×13.8-inch platform with a large contact surface and non-slip rubber stripes, providing extra grip to prevent slipping and protecting the bottom of your motorcycle from scratches.
Where to find 2007 Softail Deuce FXSTD OEM service parts
Harley-Davidson’s UK site has a page specifically for 2007 Softail Deuce FXSTD OEM service parts. It is a model-specific official starting point, but it is a UK regional page, so availability and ordering details may not apply in other markets.
The manufacturer’s 2007 parts catalog helps identify components using its illustrations and part numbers. Harley-Davidson explicitly warns: “THIS IS NOT AN ASSEMBLY MANUAL AND SHOULD NOT BE USED AS SUCH.” Use it for parts identification, not repair instructions.
Rank #2
VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports
- Large Weight-bearing Capacity: When you need to lift your motorcycle for maintenance and cleaning, you can partner with a VEVOR hydraulic motorcycle lift jack. Through the load-bearing tests, the motorcycle lift jack can securely hold up to 1500 lbs/0.7 tons. The motorcycle center jack is a great helper in your garage to lift almost any standard motorcycle, touring bike, cruiser, ATV, and other models.
- Hydraulic Motorcycle Lift Jack: With a long handle and press pedal, this motorcycle lift jack allows easy operation and lifting with minimal effort. The high-quality hydraulic pump provides a lifting range of 4.7 to 15 inches, making motorcycle jack stand lift perfect for heavy motorcycles with less resistance.
- Lift with Peace of Mind: Our hydraulic motorcycle jack has a 3-position safety pin that secures it at the desired height. The non-slip rubber stripe platform and two ratchet belts ensure the stability of heavy vehicles during maintenance, making the motorcycle lift safer for operation.
- Slide and Lock in Any Position: Comes equipped with 2 universal casters and 2 directional casters, making the motorcycle lift easy to move under the motorcycle or wherever you need it. The motorcycle stand can also be used for short-distance transportation of heavy vehicles.
- High-quality Steel Material: Made of high-strength solid steel structure and coated with a bright powder coating, this motorcycle jack is rust, corrosion, and grease-resistant, ensuring a long-term use. Neatly store it in your garage or repair shop for easy access. Get your hydraulic motorcycle jack today and make motorcycle maintenance a breeze
How to check replacement-part fitment
- Confirm the model and year. Establish that the motorcycle is a 2007 FXSTD Deuce, rather than relying only on a listing that says “Softail.”
- Find the exact part number. Use the catalog illustrations and identification information to locate the relevant component and its listed number.
- Verify against the full VIN. Harley-Davidson directs users to provide the complete 17-digit VIN for parts inquiries. Ask the dealer or parts source to confirm fitment for that VIN before purchase.
- Check the market and listing details. Confirm the supplier serves your region and that the listing matches the required part number. Shared Softail family labeling does not establish interchangeability.
Finding a 2007 Harley Davidson FXSTD Softail Deuce service manual
A retailer listing describes a 2007 FXSTD Softail Deuce service, repair or workshop manual covering the 96 cubic inch (1584 cc) engine and including a wiring diagram. The retailer page showed the product as sold out when retrieved; that observation does not establish current stock or availability through Amazon or another seller.
Before buying a manual, check that its stated year and model match the 2007 FXSTD, that it covers the relevant engine, and that the language and format suit your needs. Confirm availability with the seller at the time of purchase. A parts catalog is not a substitute for a workshop manual or an assembly procedure.
Recommended: Fix Windows Errors and Clear Junk Files in Minutes - Free Scan →Recommended: Crashes or Glitches? A Free Driver Scan Usually Finds the Culprit →Recommended: PC Feels Slow? A Free Scan Shows What's Dragging Windows Down →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Quick Recap
SaleBestseller No. 1
Best Value
Sale
Motorcycle Lift Table, Pneumatic, 1,500 lb, ProLift, 31.25" H, Black Widow
- PNEUMATIC COMPRESSED AIR LIFT: Foot pedal effortlessly raises any motorcycle weighing up to 1,500 lbs. from 7" to 31.25" off the ground. 90-110 PSI is required.
- EASY TO USE: Simply push your motorcycle onto the platform and into the adjustable wheel clamp to keep it upright while you tighten the wheel vise and attach the safety straps from your motorcycle to the built-in tie-down point to secure your bike to the table.
- DURABLE CONSTRUCTION: Manufactured from heavy duty powder-coated steel, this lift includes a removable 20" ramp for easy loading and unloading.
- ADDITIONAL FEATURES: Integrated dolly wheels for enhanced maneuverability and a rear drop out panel for easy access to wheels. Motorcycle center jack included and an 8-position safety lock.
- DIMENSIONS: Platform measures 105.5" L x 24" W with a lift range of 7" to 31.25" H
Rank #4
Sale
VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red
- HEAVY-DUTY LIFT JACK PERFORMANCE: Built from solid heavy-duty steel, this motorcycle lift jack easily raises your bike or ATV up to 1100 lbs; Its smooth lifting range from 3.5" - 14.5" lets you adjust height precisely for engine, transmission, or wheel maintenance
- EASY JACK OPERATION & CONTROL: Equipped with a reinforced crank handle, the scissor jack provides effortless lifting and lowering; The adjustable screw adapters allow better balance on uneven floors; Operate with precision and stability for any motorcycle maintenance or repair task
- STABLE STAND PLATFORM DESIGN: The wide 14.6" x 9" platform is covered with a textured rubber pad to prevent slippage and scratches; Its anti-slip stand keeps motorcycles steady during lifting; Perfect for floor, engine, or chain maintenance, ensuring every motor stays secure and well-supported
- UNIVERSAL USE: Designed to fit most motorcycles, UTVs, scooters, and snowmobiles; Compact scissor structure saves garage and trailer space; Easy to move and store after use; An essential lifting tool for Harley Davidson, mini motor, and dirtbike owners who value versatility
- PREMIUM MATERIALS & ACCESSORIES INCLUDED: Powder-coated red finish resists oil, grease, and rust for easier cleaning; The durable steel frame ensures long-lasting strength; Comes with a motorcycle chain cleaning brush that keeps your chain smooth and extends its lifespan
Rank #3
Sale
VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles
- Large Weight-bearing Capacity: When you need to lift your motorcycle for maintenance and cleaning, you can partner with a VEVOR motorcycle scissor lift jack. Through the load-bearing tests, the motorcycle lift jack can securely hold up to 1100 lbs/0.5 tons. The motorcycle center jack is a great helper in your garage to lift your street bikes, cruiser bikes, and adventure touring motorcycles.
- Easy to Operate: Lift your motorcycle with no extra tools, sweat-free. All it takes is a spin of the detachable metal handle to raise the motorcycle jack effortlessly. Adjust the height between 3.7"/95 mm and 13.8"/350 mm for easy bike repairs and maintenance.
- Safety First:The steel X-frame's central shaft holds your motorcycle in various positions. A 6-position safety pin ensures a secure lift, reducing the risk of falls and keeping you and your motorcycle secure.
- Non-slip Wide Deck: You don't like your motorcycle shaking and sliding on the small platform during lifting, do you? Our 14.4" x 9" extra-wide top platform provides a large contact area. And a durable rubber pad with a striped pattern prevents slipping and protects your motorcycle from scratches.
- Fold and Store: Fold the center lift stand to a 3.7-inch height for compact storage and transport. The powder-coated finish resists oil, grease, and rust, making the motorcycle scissor jack easy to clean and store in your garage or repair shop. All your worries will just disappear.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
