On Viper systems that use the documented Alarm/System Valet procedure, switch the ignition ON and then OFF, then press and release the Control Center button once. Check the system’s LED or other confirmation signal to verify the change. Viper has several valet modes, so use your system’s owner guide for the exact procedure—especially if you mean remote-start (Start Valet) mode.
First, identify which Viper valet mode is active
“Valet mode” can refer to Alarm Valet, System Valet, Start Valet, or Combo Valet. These modes do not necessarily disable the same functions, and the button sequence can differ. A single press that exits Alarm/System Valet may not turn off Start Valet.
If you know the system model, use its owner guide to confirm the mode and procedure. The model-specific Directed 5908V Owner’s Guide, for example, describes both manual and remote ways to enter or exit its valet mode; its remote commands should not be assumed to work on other Viper systems.
Turn off Alarm or System Valet with the Control Center
- Turn the vehicle ignition ON, then OFF.
- Press and release the Control Center (valet) button once.
- Check the status LED and any siren, horn, or parking-light confirmation described in your system’s owner guide. The signal varies by system and mode.
This is the documented manual procedure for systems whose guide specifies a one-press Alarm/System Valet toggle. Viper product materials describe the Control Center as combining the antenna, valet switch, and status LED on the listed system; button placement and equipment can differ by installation.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Viper 2 Way replacement remote with up to 1/2 mile range. Comes with AAA battery installed
- 4-Button remote control with LCD display
- Provides visual and audible confirmation when commands are sent successfully
- Priority icons map for simple and clear vehicle monitoring
- Lock, unlock and start your vehicle remotely with the touch of a button. Viper System Compatibility: 4305V, 3305V, 5305V
If you mean Start Valet, use its separate procedure
On systems with a separate Start Valet mode, the documented manual procedure is to hold the Control Center button for five seconds. The cited guide material describes nine parking-light flashes as confirmation; on some systems, flash speed distinguishes turning the mode on from turning it off. Follow the owner guide for your exact system rather than treating that signal or hold time as universal.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Use a remote only if its instructions match your model
Remote commands vary by system and remote type. For the 5908V, the guide gives different procedures for its 2-way and 1-way remotes:
Rank #2
- Lock, unlock and start your vehicle remotely with the touch of a buttom. Viper System Compatibility: 4702V, 5704V, 4704V, 5702V, 4708V, 9752VL
- 5-Button remote control
- Viper 2 Way replacement remote with up to one mile range
- Compatible With Models: 3606V/3806V/4606V/4806V/5606V/5806V
- 5908V 2-way remote: Open the User Menu, go to the Valet page, select VALET, then press FUNCTION to save and send the command.
- 5908V 1-way remote: Press FUNCTION twice, then press and release UNLOCK.
These are 5908V-specific instructions, not general Viper commands. See the 5908V Owner’s Guide for its complete remote procedure.
Quick Recap
Best Value
- Remote Compatibility: System Model Number (Alarm, Remote Starter): Viper 130 HV, Viper 350 HV; System Part Number (Remotes) Viper 561V, Viper 426V
Rank #3
- fits the following aftermarket alarm systems: Viper DEI Python Clifford
- Replacement for P/N: EZSDEI7141 7145V
- User programmable with provided step-by-step instructions
- Complete electronic assembly with battery
- This is a replacement aftermarket part
If valet mode will not turn off
- Confirm the mode: Check whether the guide describes Alarm/System Valet, Start Valet, or a combined mode; each may respond differently.
- Verify the system model: Look for the system’s documentation or identifying information, then match the instructions to the installed system—not just the remote’s appearance.
- Check the Control Center: If the button is missing or unresponsive, or you cannot identify the system, a Viper dealer or qualified automotive security installer can help. Viper’s product materials provide a dealer-finding route.
- Replace a remote only if needed: If you do not have a working remote, verify compatibility with the exact system before buying one. Viper’s remote compatibility information and product listings, such as its 7211V page, show why model and, for some older products, date-code details matter. The manual Control Center procedure does not require a replacement remote.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →
